This information is given in German below.
Weiter unten finden Sie diese Informationen auf Deutsch.
--------------------------------------------------------------------------------


October 2006

What is new in tiamo 1.2:
- Integration of 857 Titrando
- Integration of 854 iConnect
- Raw data tab under results in determinations database
- Gran plot evaluation
- Sample addition time for commands with conditioning


The following bugs have been fixed:
- Exception after double click on start-button
- More than one manual control window can be opened
- External position does not allow comma as decimal separator
- Export of determinations containing a TRANSFER-command fails
- Standard addition shows only first decimal place
- Pressing apply-button on SEQUENCE gives an exception
- Axial distance is not written to the sample changer when no swing head mounted
- Importing configurations may lead to an exception
- Mettler AT and AE balances cannot be used
- Assert if solution data not correct
- Tiamo records Titrino cylinder volume during start up, no other cylinder volume may be used afterwards
- Databases could contain illegal characters, leading to an exception
- Tiamo gets blocked if you change view and print afterwards a determination overview
- Sample size gets cut after the decimal separator if using REQUEST (only if comma separator not point)
- Formula in CAL LOOP Conc leads to an exception after start
- Exception on editing CSV properties
- Exception during automatic import of sample data
- Importing determinations with large measuring point lists gives an exception, handling with large measuring point lists improved
- Exception during REPORT if REQUEST used, statistics enabled and sample size, sample unit, or ID1 is missing
- Exception during sample data table test if a Common Variable expired
- Exception if infinite values are used in curve display


Further documents can be found in the installation folder of the tiamo software in the folder "doc" (subfolder "english"):
8-101-0023 User manual for tiamo 1-2.pdf                      User Manual for tiamo
8-101-0323 Installation manual for tiamo 1-2.pdf              Installation Instructions for tiamo
8-101-0403 Tutorial for tiamo 1-X.pdf                         Tutorial for tiamo
8-101-0623 System assessment report for tiamo 1-2.pdf         System Assessment Report for tiamo referring to 21 CFR Part 11
8-101-0803 License agreement				      Software license agreement
8-101-0963 Conformity certificate for tiamo 1-2.pdf           Audit report for compliance check of tiamo against requirements of 21 CFR Part 11
8-101-0973 Declaration of conformity for tiamo 1-2.pdf        Declaration of conformity regarding software validation for tiamo
8-101-0983 GAMP certificate for tiamo 1-2.pdf                 Certificate for categorization according to GAMP


Further documents about the tiamo installation:
In the folder "...\bin\InstallLog" of the tiamo installation folder you will find:
InstallLog-YYYYMMDD-hhmmss.txt                  Log file Software Installation
UpdateLog-YYYYMMDD-hhmmss.txt                   Log file Software Update




--------------------------------------------------------------------------------


Oktober 2006

Was ist neu in tiamo 1.2?
- 857 Titrando aufgenommen
- 854 iConnect aufgenommen
- Registerkarte Rohdaten fr Resultate in der Bestimmungsdatenbank
- Gran plot Auswertung
- Probenzugabezeit fr Befehle mit Konditionieren


Folgende Fehler in tiamo wurden behoben:
- Absturz nach Doppelklick auf Start-Knopf
- ffnen von mehr als einem Fenster fr die manuelle Bedienung
- Komma als Dezimaltrenner fr externe Position nicht erlaubt
- Fehler beim Export von Bestimmungen mit einem TRANSFER-Befehl
- Bei der Standardaddition wird nur die erste Nachkommastelle angezeigt
- Absturz beim Drcken von [bernehmen] in SEQUENCE-Befehl
- Achsenabstand wird nicht im Probenwechsler gespeichert wenn kein Swing Head montiert ist
- Absturz beim Import von Konfigurationsdaten
- Mettler AT und AE Waagen knnen nicht verwendet werden
- Absturz wenn Lsungsdaten nicht korrekt sind
- Beim Titrino kann nur das beim Initialisieren erkannte Zylindervolumen verwendet werden
- Datenbanken knnen ungltige Zeichen enthalten, was zu einem Absturz fhrt 
- Blockierung von tiamo wenn die Ansicht gendert wird und danach eine Bestimmungsbersicht gedruckt wird
- Bei der Verwendung von REQUEST wird das Einmass nach dem Dezimaltrenner abgeschnitten, falls der Dezimaltrenner nicht ein Punkt ist
- Eine Formel im Befehl CAL Loop Conc fhrt nach dem Start zu einem Absturz
- Absturz beim Editieren von CSV-Eigenschaften
- Absturz beim automatischen Import von Probedaten
- Absturz beim Import von Bestimmungen mit grossen Messpunktlisten
- Absturz beim Ausfhren von REPORT, wenn REQUEST verwendet wird, die Statistik eingeschaltet ist und Einmass, Einheit oder ID1 fehlt
- Absturz beim Test einer Probedatentabelle, falls eine Common Variable abgelaufen ist
- Absturz wenn unendliche Werten in der Kurvenanzeige angezeigt werden sollen


Weitere Dokumente zu tiamo:
Im tiamo-Installationsverzeichnis finden Sie im Verzeichnis "doc" (Unterordner "deutsch") noch weitere Dokumente:
8-101-0021 Benutzerhandbuch fr tiamo 1-2.pdf                 Benutzerhandbuch fr tiamo
8-101-0321 Installationsanleitung fr tiamo 1-2.pdf           Installationsanleitung fr tiamo
8-101-0401 Tutorial fr tiamo 1-X.pdf                         Bedienungslehrgang fr tiamo
8-101-0621 System assessment Bericht fr tiamo 1-2.pdf        System Assessment Bericht fr tiamo bzgl. 21 CFR Part 11
8-101-0801 Lizenzvereinbarung                                 Software-Lizenzvereinbarung
8-101-0961 Konformitaets-Zertifikat fr tiamo 1-2.pdf         Auditprotokoll zum Nachweis der bereinstimmung der tiamo Software gegenber den Anforderungen von 21 CFR Part 11
8-101-0981 GAMP Zertifikat fr tiamo 1-2.pdf                  Zertifikat zur GAMP-Kategorisierung


Weitere Dokumente zur tiamo-Installation:
Im tiamo-Installationsverzeichnis unter "...\bin\InstallLog" finden Sie:
InstallLog-JJJJMMTT-hhmmss.txt                  Logdatei Software Installation
UpdateLog-JJJJMMTT-hhmmss.txt                   Logdatei Software Update

