Accessory Finder

6.05700.170

Replacement seals for 6.02710.010 lid, 16 pieces

6.05700.250

Four rubber gripper fingers for replacement on the gripper finger of the OMNIS Sample Robot.

6.05700.401

Cylinder unit OMNIS 2 mL complete with cylinder, piston, cylinder base, valve disk, centering tube, and cylinder housing, including programmed data chip.

6.05700.411

Cylinder unit OMNIS 5 mL complete with cylinder, piston, cylinder base, valve disk, centering tube, and cylinder housing, including programmed data chip.

6.05700.421

Cylinder unit OMNIS 10 mL complete with cylinder, piston, cylinder base, valve disk, centering tube, and cylinder housing, including programmed data chip.

6.05700.431

Cylinder unit OMNIS 20 mL complete with cylinder, piston, cylinder base, valve disk, centering tube, and cylinder housing, including programmed data chip.

6.05700.441

Cylinder unit OMNIS 50 mL complete with cylinder, piston, cylinder base, valve disk, centering tube, and cylinder housing, including programmed data chip.

6.05700.451

Cylinder unit special 20 mL, complete with cylinder, piston, cylinder base, valve disk, centering tube, housing, and data chip. For 6.03004.220 OMNIS cylinder unit.

6.05700.460

Cylinder unit special 10 mL, complete with cylinder, piston, cylinder base, valve disk, centering tube, housing, and data chip. For 6.03004.210 OMNIS cylinder unit.

6.05800.000

The set contains all of the components required for upgrading an already existing OMNIS Sample Robot from size S to size M. In addition to the required rack and module bases, all of the required cables, screws and arm extensions are included, as is the function license. As before, the set also contains a drain channel for OMNIS Sample Robot M/L.

6.05800.010

The set contains all of the components required for the upgrade of an already existing OMNIS Sample Robot from size S to size L. In addition to the required rack and module bases, all of the required cables, screws and arm extensions are included, as is the function license. As before, the set also contains a drain channel for OMNIS Sample Robot M/L.

6.05800.020

The set contains all of the components required for the upgrade of an already existing OMNIS Sample Robot from size M to size L. Apart from the required rack and module bases, all the required cables, screws, arm extensions as well as the function license are included.

6.05800.030

This set contains all of the components that are required for the upgrade of a peristaltic (2-channel) pump module to a peristaltic (4-channel) pump module in the OMNIS Sample Robot Pick&Place. In addition to the pumps required, all the necessary tubing and canisters are included to equip one additional rinsing pump and one additional aspiration pump each.

6.05800.060

Upgrade Kit for retrofitting the Eco IC with a pulsation absorber.

6.05800.070

This set includes a top lid tray for upgrading a Sample Robot S lid tray for use in the OMNIS Sample Robot M or L.

6.05800.080

This set contains all of the components that are required for the upgrade of a peristaltic (2-channel) pump module to a peristaltic (4-channel) pump module in the OMNIS Sample Robot Pick&Place. In addition to the pumps required, all the necessary tubing and canisters are included to equip one additional rinsing pump and one additional aspiration pump each. Compatible with OMNIS software version 2.13.2 and 2.17 or higher.

6.05800.540

This set contains all of the components required to extend an OMNIS Workstation Module (1T/0P) or (1T/2P) to include a second workstation. Sample throughput can be doubled as a result of the extension.

6.05800.560

This set contains all of the components required to equip a workstation of an OMNIS Workstation Module with a magnetic stirrer.

6.05800.570

This set contains all of the components that are required for the upgrade of an OMNIS Workstation Module involving the addition of 2 pumps. This set can be used not only to extend the number of pumps from 0 to 2, but also from 2 to 4, and enables the effective cleaning of sensors and sample vessels. In addition to the pumps required, all of the necessary tubing and canisters are included for equipping 1 rinsing pump and 1 aspiration pump each.

6.05800.600

This set contains all of the components required for upgrading an already existing OMNIS Sample Robot WSM from size S to size M. In addition to the required rack and module bases, all of the required cables, screws, and arm extensions are included, as is the function license. As before, the set also contains a drain channel for the OMNIS Sample Robot M/L

6.05800.610

This set contains all of the components required for upgrading an already existing OMNIS Sample Robot WSM from size S to size L. In addition to the required rack and module bases, all of the required cables, screws, and arm extensions are included, as is the function license. As before, the set also contains a drain channel for the OMNIS Sample Robot M/L.

6.05800.620

This set contains all of the components required for upgrading an already existing OMNIS Sample Robot WSM from size M to size L. In addition to the required rack and module bases, all of the required cables, screws, and arm extensions are included, as is the function license.

6.05800.630

This set contains the required parts for preparing an existing Sample Robot Pick&Place M or L, which has a maximum of 1 pump module and 2 Pick&Place Modules, for the utilization of an OMNIS Workstation Module.

6.05802.000

Adaptation kit for retrofitting the optimization of the 2 mm setup for non-suppressed or chemically suppressed ProfIC or Compact IC instruments.

6.05802.010

Adaptation kit for retrofitting the optimization of the 2 mm setup for sequentially chemically suppressed ProfIC or Compact IC instruments.

6.06001.380

Temperature gradient function license for OMNIS Sample Robot Oven. This license enables the slow heating-up of an unknown sample and the determination of the optimum heating-up temperature.

6.06071.010

Simple-to-use software that is primarily used for downloading and analyzing data, printing reports, creating spectral libraries and operating procedures, as well as managing 21 CFR Part 11 compliance.

6.06071.030

User-friendly software that is primarily used for downloading and analyzing data, printing reports, creating spectral libraries and operating procedures, as well as managing compliance with FDR 21 CFR Part 11 regulations.

6.06071.040

50:50 (v:v) Toluene/Acetonitrile ASTM standard for calibration of the wave number axis of MIRA M-3/P spectrometers and polystyrene for wave number verification according to EP 2.2.48.

6.07311.010

Boat Introduction Module for the Combustion IC for use with the quartz combustion tube. This module uses a sample boat to transfer samples into the oven for combustion.It also includes a pair of tweezers and a petri dish for handling the sample boat.

6.07311.020

Boat Introduction Module for the Combustion IC for use with the ceramic combustion tube. This module uses a sample boat to transfer samples into the oven for combustion.It also includes a pair of tweezers and a petri dish for handling the sample boat.

6.07311.030

The Liquid Introduction Module enables the combustion of liquid samples by using an automatic syringe to inject the sample directly. The module can be used for samples with a boiling point 420 °C.This module can also guide gaseous or LPG samples into the oven from the GLS Sampler CIC.

6.07311.040

The Liquid Introduction Module enables the combustion of liquid samples by using the Liquid Autosampler CIC to inject the sample directly. The module can be used for samples with a boiling point < 420 °C.This module can also guide gaseous or LPG samples from the GLS Sampler CIC into the oven.

6.07311.100

Quartz combustion tube for the Combustion Oven (TEI).

6.07311.110

Ceramic combustion tube for the Combustion Oven (TEI).

6.07311.200

Quartz cup for sample injection in Metrohm Combustion IC (TEI), 3 pcs.

6.07311.210

Quartz cup for sample injection in Metrohm Combustion IC (TEI), 30 pcs.

6.07311.220

Ceramic cup for sample injection in Metrohm Combustion IC (TEI), 3 pcs.

6.07311.230

Ceramic cup for sample injection in Metrohm Combustion IC (TEI), 30 pcs.

6.07311.240

Slider boat for the Boat Introduction Module 6.07311.010, quartz.

6.07311.250

Boat drive for sample boat of the 6.07311.020 Boat Introduction Module, ceramic.

6.07311.260

Boat guiding tube for the Boat Introduction Module quartz (6.07311.010) or ceramic (6.07311.020).

6.07311.270

O-Ring Set (TEI) for the combustion tube and the guide tubing for the Boat Introduction Module.

6.07311.280

O-Ring Set (TEI) for the combustion tube.

6.07311.290

Septum for liquid injection port of the Introduction Modules (TEI) 6.07311.010, 6.07311.020, 6.07311.030, 6.07311.040.

6.07311.300

Lid for fastening the 6.07311.290 septum in place in the Liquid Introduction Module.

6.07311.310

Tubing for oxygen and ultrapure water supply at the inlet to the combustion tube (TEI).

6.07311.350

Spare filter for the fan in the Combustion Oven (TEI).

6.07312.010

Solid sample tray no. 1 for the Solid Autosampler CIC (2.0136.0620) for 20 positions.

6.07312.020

Solid sample tray no. 2 for the Solid Autosampler CIC (2.0136.0620) for 20 positions.

6.07312.030

Solid sample tray no. 3 for the Solid Autosampler CIC (2.0136.0620) for 20 positions.

6.07313.020

Screw including collapsible ferrule for 1/16" tubing to connect the transfer line to the needle on the Liquid Autosampler CIC (TEI).

6.07313.040

Wash/waste container set for the Liquid Autosampler CIC (TEI).

6.07313.050

Set of Prime Vials for the preparation of the Liquid Autosampler CIC (TEI).

6.07313.100

Dosing syringe for manual injection of liquid samples using one of the three Introduction Modules (6.07311.010, 6.07311.020, or 6.07311.030).

6.07313.110

Replacement needle (TEI) for dosing syringe for Liquid Autosampler CIC (2.0136.0610) or manual liquid sample injection.

6.07314.010

Replacement needle for sample injection with the GLS Sampler CIC (TEI).

6.07314.020

Coupling to connect the injection needle with the sample flow path of the GLS Sampler CIC (TEI).

6.07314.030

Quick connect for sample cartridge for connection to the GLS Sampler CIC (TEI).

6.07314.040

Acrylic glass cover for the GLS Sampler CIC (TEI) which can be connected to a fume cupboard.

6.07401.010

Cuvette holder for the OMNIS NIR Analyzer for 1 mm quartz cuvettes (6.7401.200).

6.07401.020

Cuvette holder for the OMNIS NIR Analyzer for 2 mm quartz cuvettes (6.7401.210).

6.07401.030

Cuvette holder for the OMNIS NIR Analyzer for 5 mm quartz cuvettes (6.7401.220).

6.07401.040

Cuvette holder for the OMNIS NIR Analyzer for 10 mm quartz cuvettes (6.7401.230).

6.07401.050

Vial Holder for the OMNIS NIR Analyzer for 2 mm disposable vials (6.7402.070).

6.07401.060

Vial Holder for the OMNIS NIR Analyzer for 4 mm disposable vials (6.7402.250).

6.07401.070

Vial Holder for the OMNIS NIR Analyzer for 8 mm disposable vials (6.7402.240).

6.07401.080

Vial Holder for the OMNIS NIR Analyzer for 10 mm disposable vials (6.7402.100).

6.07401.100

Cuvette holder for the OMNIS NIR Analyzer for flow-through cells(6.7401.300; 6.7401.310; 6.7401.320; 6.7401.330; 6.7401.340).

6.07401.110

Connection set for flow-through cells with an OMNIS Sample Robot.Contains flangeless sleeve 1/8", 10 pcs., Flangeless fitting with nut, 1/8", 10 pcs. and FEP tubings 1/8" x 1.59 mm, 4 pcs.

6.07401.320

Flow quartz cuvettes with an optical path length of 2.0 mm suitable for near-infrared spectroscopy (NIRS) analyses.Compatible with:Holder OMNIS NIR, flow-through cell (6.070401.100);

6.07401.330

Flow quartz cuvettes with quartz glass window and two optical path lengths (2.5 mm or 5.0 mm) suitable for near-infrared spectroscopy (NIRS) analyses.Compatible with:Holder OMNIS NIR, flow-through cell (6.070401.100)

6.07401.340

Flow quartz cuvettes with quartz glass window and two optical path lengths (5.0 mm or 10.0 mm) suitable for near-infrared spectroscopy (NIRS) analyses.Compatible with:Holder OMNIS NIR, flow-through cell (6.070401.100);

6.07402.100

Large holder for large sample vessel OMNIS NIR, 100 mm (6.07402.110).Permits unambiguous positioning of the sample vessel and the rotation of the sample vessel.

6.07402.110

Large sample vessel for the spectra acquisition of powders and granulates in reflection at various sample positions. The glass bottom is made of resistant Gorilla® Glass.Compatible with:Large holder OMNIS NIR, 100 mm (6.07402.100);

6.07402.120

Large lid (black) for large sample vessel OMNIS NIR, 100 mm (6.07402.110) for the reduction of stray light and slight compression of the sample.

6.07402.140

Disposable petri dishes of polystyrene with a diameter of 100 mm.Compatible with:Large holder OMNIS NIR, 100 mm (6.07402.100).;

6.07402.150

Petri dish of Duroplan glass with a diameter of 100 mm.Compatible with:Large holder OMNIS NIR, 100 mm (6.07402.100).;

6.07402.200

Small holder for small sample vessel OMNIS NIR, 60 mm (6.07402.210).Permits unambiguous positioning of the sample vessel and the rotation of the sample vessel.

6.07402.210

Small sample vessel for the spectra acquisition of powders and granulates in reflection at various sample positions.The glass bottom is made of resistant Gorilla® Glass.Compatible with:Small holder OMNIS NIR, 60 mm (6.07402.200);

6.07402.220

Small lid (black) for small sample vessel OMNIS NIR, 60 mm (6.07402.210) for the reduction of stray light and slight compression of the sample.

6.07402.240

Disposable petri dishes of polystyrene with a diameter of 60 mm.Compatible with:Small holder OMNIS NIR, 60 mm (6.07402.200).;

6.07402.250

Petri dish of Duroplan glass with a diameter of 60 mm.Compatible with:Small holder OMNIS NIR, 60 mm (6.07402.200).;

6.07402.260

Optically flat transflection vessel for the spectral measurement of liquids.

6.07402.300

Flexible holder with a variable diameter of up to 30 mm for the examination of samples in vials in reflection.

6.07402.910

Reflector with a gap size of 1 mm (optical path length of 2 mm) for the transflection measurement of liquids.Suitable for disposable 28 mm reflection vials (6.7402.140).

6.07402.920

Reflector with a gap size of 2 mm (optical path length of 4 mm) for the transflection measurement of liquids. Suitable for disposable 28 mm reflection vials (6.7402.140).

6.07402.930

Reflector with a gap size of 4 mm (optical path length of 8 mm) for the transflection measurement of liquids.Suitable for disposable 28 mm reflection vials (6.7402.140).

6.07402.940

Reflector with a gap size of 1 mm (optical path length of 2 mm) for the transflection measurement of liquids.Suitable for transflection vessels (6.07402.260 and 6.7401.000).

6.07402.950

Reflector with a gap size of 2 mm (optical path length of 4 mm) for the transflection measurement of liquids.Suitable for transflection vessels (6.07402.260 and 6.7401.000).

6.07402.960

Reflector with a gap size of 4 mm (optical path length of 8 mm) for the transflection measurement of liquids.Suitable for transflection vessels (6.07402.260 and 6.7401.000).

6.07402.970

Reflector with a gap size of 0.5 mm (optical path length of 1 mm) for the transflection measurement of liquids.Suitable for disposable vials 28 mm reflection (6.7402.140).

6.07402.980

Reflector with a gap size of 0.5 mm (optical path length of 1 mm) for the transflection measurement of liquids. Suitable for transflection vessels (6.07402.260 and 6.7401.000).

6.07410.000

Spare lamp for 2060 The NIR Analyzer and OMNIS NIR Analyzer with built-in hour counter.

6.07410.010

Dust protection cover for the OMNIS NIR Analyzer. Protects the Analyzer against dust and dirt for prolonged periods when not in use.

6.07410.020

Gripper fingers for OMNIS Sample Robot – NIR for gripping vials with an outer diameter of 8–28 mm.

6.07410.030

Set of 5 reflection standards and 1 wavelength standard for checking the wavelength accuracy, the photometric linearity, and the noise characteristics of the OMNIS NIR Analyzer in reflection mode.

6.07410.040

Set of 5 transmission standards and 1 wavelength standard for checking the wavelength accuracy, the photometric linearity, and the noise characteristics of the OMNIS NIR Analyzer in transmission mode.

6.07501.010

50:50 (v:v) Toluene/Acetonitrile ASTM standard for calibration of the wavenumber axis of MIRA/MISA systems. Class 3B operation.

6.07502.000

Vial holder attachment for MIRA systems. Accommodates 15 x 26 mm glass vials.

6.07504.000

Tablet holder attachment for MIRA systems that is used for analysis of formulated tablets of various sizes and shapes.

6.07505.000

Long distance point-and-shoot Adapter (LWD) for MIRA systems with a focal length of 7.6 mm. Class 3B operation.

6.07505.010

Short distance point-and-shoot Adapter (SWD) for MIRA systems with a focal length of 1.00 mm. Class 3B operation.

6.07505.020

Extra-long distance point-and-shoot Adapter (XLWD) for MIRA systems with a focal length of 18 mm. Class 3B operation.

6.07505.030

Accommodates Metrohm's proprietary P-SERS strips. Operation with laser class 1. The P-SERS attachment allows full insertion of P-SERS strips ensuring optimal measurement conditions.

6.07505.040

Suitable for 15 x 26 mm glass vials. MISA vial attachment can be used for measurements with Metrohm's gold or silver SERS nanoparticles. Laser Class 1 operation.

6.07506.000

The right-angle attachment is designed to allow the user to collect data by placing the substance on a surface and then laying the MIRA down next to it with the right angle tip covering the substance. Ideal for a baggy on hood of a squad car. Eliminates many of the variables during testing. Class 3B operation.

6.07506.010

The Universal attachment is designed to be a universal tip for use in three different positions. Position 3 is used for direct contact. Position 2 is used for thin plastic bags, for which the focal point is approximately 1.0 mm from the end of the adapter. Position 1 is used for focusing through bottles, for which the focal point is approximately 8 mm from the end of the metal tip. Class 3B operation.

6.07506.020

The Standoff Attachment is designed to allow the user to determine the spectrum of a substance from a distance of 0.25 to 1.5 meters. Perfect for determination of the contents of a 55-gallon drum or barrel or to stand in a doorway and scan a container from across the room.

6.07506.030

The Contact Ball Probe Attachment is designed to allow the user to collect data from a sample with no concern of proper focus. Simply contact the sample or immerse the probe to acquire the data. The stainless steel construction allows for easy cleaning. Class 3B operation.

6.07506.040

The SERS attachment enables the user to perform a very easy measurement of the SERS spectrum of a substance that has been applied to a P-SERS test strip. After applying a sample to the P-SERS test strip, the user simply inserts it into the slot of the SERS attachment for analysis.

6.07506.050

The disposable protective sheath is made of extremely thin LDPE and is used to prevent cross-contamination when using the ball probe in several containers. Quantity: 250 pieces.

6.07506.060

iUA is an intelligent 3-position collection optics accessory for MIRA systems. The iUA combines the flexibility of a universal attachment with the intelligent mode of operation of MIRA SmartTip Attachments. Each position indicates the ideal purpose of that position, i.e. surface, bag, or bottle.

6.07506.070

Maximize safety with standoff identification of chemicals, explosives, drugs, and toxic materials.Identify threats from 2 meters away; Operate remotely when risk is high; Get quick and easy information with automated routines; Identify >20,000 substances in seconds; Robot mountable for complete hot-zone assessment ;

6.07506.100

Silver P-SERS substrates (Printed SERS substrates). The substrates are designed to fit directly into the SERS attachment for optimal signal collection. Potential target analytes that show favorable performance with silver P-SERS substrates include illicit drugs, medicines, dyes and amines. Available in packs of 50.

6.07506.110

Silver P-SERS substrates (Printed SERS substrates). The substrates are designed to fit directly into the SERS attachment for optimal signal collection. Potential target analytes that show favorable performance with silver P-SERS substrates include illicit drugs, medicines, dyes and amines. Available in packs of 500.

6.07506.120

Silver P-SERS substrates (Printed SERS substrates). The substrates are designed to fit directly into the SERS attachment for optimal signal collection. Potential target analytes that show favorable performance with silver P-SERS substrates include illicit drugs, medicines, dyes and amines. Available in packs of 5000.

6.07506.130

Gold P-SERS substrates (Printed SERS substrates). The substrates are designed to fit directly into the SERS attachment for optimal signal collection. Potential target analytes that show favorable performance with gold P-SERS substrates include pesticides, medicines, and thiols. Available in packs of 50.

6.07506.140

Gold P-SERS substrates (Printed SERS substrates). The substrates are designed to fit directly into the SERS attachment for optimal signal collection. Potential target analytes that show favorable performance with gold P-SERS substrates include pesticides, medicines, and thiols. Available in packs of 500.

6.07506.150

Gold P-SERS substrates (Printed SERS substrates). The substrates are designed to fit directly into the SERS attachment for optimal signal collection. Potential target analytes that are easier to detect with gold P-SERS substrates include pesticides, medicines, and thiols. Available in packs of 5000.

607506160

Silver P-SERS substrates (Printed SERS substrates). The substrates are designed to fit directly into the SERS attachment for optimal signal collection. Potential target analytes that show favorable performance with silver P-SERS substrates include illicit drugs, medicines, dyes and amines. Available in packs of 25.

607506170

Gold P-SERS substrates (Printed SERS substrates). The substrates are designed to fit directly into the SERS attachment for optimal signal collection. Potential target analytes that show favorable performance with gold P-SERS substrates include pesticides, medicines, and thiols. Available in packs of 25.

607506300

SERS active silver colloidal solution. Potential target analytes that show favorable performance with silver colloid include illicit drugs, medicines, dyes, and amines - 10 ml package.

607506310

SERS active silver colloidal solution. Potential target analytes that show favorable performance with silver colloid include illicit drugs, medicines, dyes, and amines - 50 ml package.

607506340

SERS active silver colloidal solution. Potential target analytes that show favorable performance with silver colloid include illicit drugs, medicines, dyes, and amines - 500 ml package.

607506350

SERS active gold colloidal solution. Potential target analytes that show favorable performance with gold colloid include pesticides, medicines, and thiols - 10 mL package.

607506360

SERS active gold colloidal solution. Potential target analytes that show favorable performance with gold colloid include pesticides, medicines, and thiols - 50 mL package.

607506390

SERS active gold colloidal solution. Potential target analytes that show favorable performance with gold colloid include pesticides, medicines, and thiols - 500 mL package.

The ID Kit - Illicit Materials contains all the components a MIRA / MISA user requires to analyze a crude street sample and determine whether opioid and other illicit drugs are present.The kit contains a disposable spatula, dropper, a small vial of solvent, and 2 silver P-SERS strips (Ag). The user simply scoops a small amount of the unknown sample into the vial of solvent and then either dip the P-SERS strip into the vial OR use the provided dropper to apply sample onto the strip.The ID Kit allows the detection and identification of trace amounts of opioid, even in highly fluorescent street samples.

6.07506.440

The ID Kit - Au NP contains the components a Mira / Misa user requires to perform a SERS analysis using gold colloidal solution. The kit contains a disposable spatula, dropper, sample vials and a bottle of gold colloid.

607506450

The ID Kit - Ag NP contains the components a Mira / Misa user requires to perform a SERS analysis using silver colloidal solution. The kit contains a disposable spatula, dropper, sample vials, and a bottle of silver colloid.

607506460

The ID Kit - Au P-SERS contains the components a Mira / Misa user requires to perform a SERS analysis using gold P-SERS strips. The kit contains a disposable spatula, dropper, sample vials and 2 gold P-SERS strips.

6.07506.470

The ID Kit - Ag P-SERS contains the components a Mira / Misa user requires to perform a SERS analysis using silver P-SERS strips. The kit contains a disposable spatula, dropper, sample vials and 2 silver P-SERS strips.

607506480

Introductory kit for SERS analysis containing gold and silver P-SERS strips and gold and silver colloids.

6.07507.000

Optical Blackout cloth for sampling in sunlight conditions.

6.07507.100

The MIRA DS Field Carry Pouch is a utility pouch with padded sides for carrying the MIRA into the field. It has space for MIRA, four AA batteries, the right-angle attachment, iUA, calibration standard, and a few ID Kits.The Field Carry Pouch can be attached to any of the current military pouch/backpack systems.

607507300

Pouch for TacticID-1064 ST Basic package attachments.

607507310

Pouch for TacticID-1064 ST Advanced package attachments.

607509000

TacticID-1064 ST sampling attachment providing larger spot size and sampling depth for see-through capability and preventing sample burning of colored samples.

607509010

Smart sampling attachment with a working distance of 6 mm.

607509020

Short Working Distance (SWD) Smart Attachment with a working distance of 1 mm.

607509030

Smart sampling attachment for vials. Accommodates 15 mm x 45 mm glass vials.

607509040

Long Working Distance (LWD) Smart Attachment with a working distance of 8 mm.

607509050

TacticID-1064 ST right-angle adapter for hands-free measurements.

607509060

Smart immersion probe for direct contact sampling with a working distance of approximately 5 mm.Length: 8 inchesOperating Pressure: up to 2 bar at room temperature

607509070

Smart sampling attachment for calibration and validation on the Metrohm TacticID-1064 ST.

607510000

Power supply for i-Raman NxG and i-Raman Duo systems.

607510010

Interlock plug for i-Raman NxG and i-Raman Duo systems.

607510030

USB-C to USB-C cable for i-Raman NxG, i-Raman Duo, and i-Raman Plus systems.

607510040

Validation cap with integrated polystyrene standard for lab-grade Raman probes with shaft diameter of 9.5 mm.

607510050

Laser key for i-Raman NxG, i-Raman Duo, and i-Raman Plus systems.

607510060

AC power cord for i-Raman NxG, i-Raman Duo, and i-Raman Plus systems.

607510070

Laser Safety Goggles, 532 nm Wavelength.

607510080

High-throughput lab-grade fiber optic Raman probe assembly with trigger button. 1.5 meter fiber length.Compatible with i-Raman NxG 532.

607510090

High-throughput lab-grade fiber optic Raman probe assembly with trigger button. 5 meter fiber length.Compatible with i-Raman NxG 532.

607510120

Replacement shaft for 532 nm excitation lab-grade Raman probe assembly. Working distance 5.4 mm.

607510130

Laser Safety Goggles, 785 nm Wavelength.

607510140

High-throughput lab-grade fiber optic Raman probe assembly with trigger button. 1.5 meter fiber length.Compatible with i-Raman NxG 785S and 785H models.

607510150

High-throughput lab-grade fiber optic Raman probe assembly with trigger button. 5 meter fiber length.Compatible with i-Raman NxG 785S and 785H models.

607510180

See-through probe for measurements through packaging. 1.5 meter fiber length. Includes focus adapter, surface regulator, and light shield. Compatible with i-Raman NxG 785S and 785H models.

607510190

See-through probe for measurements through packaging. 5-meter fiber length. Includes focus adapter, surface regulator, and light shield.Compatible with i-Raman NxG 785S and 785H models.

607510220

Replacement shaft for 785 nm excitation lab-grade Raman probe assembly. Working distance 5.5 mm.

607510230

See-through shaft for use with lab-grade Raman probes. Optimized for 785 nm laser.Contains focus adapter, surface regulator, and light shield.

607510240

C-276 Hastelloy immersion shaft compatible with lab-grade Raman probes. Includes adjustable shaft adapter. Compatible with 532, 785, 860 and 1064 nm wavelengths.

607510250

Laser Safety Goggles, 1064 nm Wavelength.

607510260

High-throughput lab-grade fiber optic Raman probe assembly with trigger button. 1.5 meter fiber length.Compatible with i-Raman NxG 1064.

607510270

High-throughput lab-grade fiber optic Raman probe assembly with trigger button. 5 meter fiber length.Compatible with i-Raman NxG 1064.

607510300

See-through probe for measurements through packaging. 1.5 meter fiber length. Includes focus adapter, surface regulator, and light shield.Compatible with i-Raman NxG 1064.

607510310

See-through probe for measurements through packaging. 5-meter fiber length. Includes focus adapter, surface regulator, and light shield.Compatible with i-Raman NxG 1064.

607510340

Replacement shaft for 1064 nm excitation lab-grade Raman probe assembly. Working distance 5.9 mm.

607510350

See-through shaft for use with lab-grade Raman probes. Optimized for 1064 nm laser.Contains focus adapter, surface regulator, and light shield.

607510360

High-throughput lab-grade fiber optic Raman probe assembly with trigger button. 1.5 meter fiber length. Compatible with i-Raman Duo.

6.07510.370

High-throughput lab-grade fiber optic Raman probe assembly with trigger button. 1.5 meter fiber length. Compatible with i-Raman Duo.

607510400

Probe holder for use with Metrohm's lab-grade Raman probes, including lab-grade shafts, industrial-grade immersion shafts, and see-through shafts. Provides manual coarse and fine XYZ adjustments.

607510410

Vial holder accessory for use with lab-grade Raman probes with shaft diameter of 9.5 mm. Compatible with 15 mm-diameter vial. 6-pack of 15 mm borosilicate glass vials included.

607510420

Cuvette holder for use with lab-grade Raman probes with shaft diameter of 9.5 mm. Compatible with standard cuvettes of 12.5 mm x 12.5 mm outer diameter (1 cm path length) for sampling liquids or powders.

607510430

Distance regulator cap for standard lab-grade Raman probe shaft.

607510450

Lab-grade fiber optic Raman probe assembly with trigger button. 1.5 meter fiber length. Compatible with i-Raman Plus 785S and 785HR models.

607510460

Lab-grade fiber optic Raman probe assembly with trigger button. 5 meter fiber length. Compatible with i-Raman Plus 785S and 785HR models.

607510490

Lab-grade fiber optic Raman probe assembly with trigger button. 1.5 meter fiber length. Compatible with i-Raman Plus 532.

607510500

Lab-grade fiber optic Raman probe assembly with trigger button. 5 meter fiber length. Compatible with i-Raman Plus 532.

607510850

607510910

Stainless steel flow cell for Raman lab-grade probes. Compatible with 1/8'' Swagelok and Parker A-lok connection fittings.

607511010

316 Stainless steel immersion shaft compatible with lab-grade Raman probes. Includes adjustable shaft adapter. Compatible with 532, 785, 860 and 1064 nm wavelengths.

607511270

Enclosure for i-Raman sampling accessories, including microsampling system and probe holder. The enclosure eliminates direct ocular and/or skin exposure to the laser emission, making the otherwise class 3B i-Raman series laser as safe as a class 1 laser. The enclosure is ergonomically designed to facilitate sample loading and system operation. Compatible with i-Raman NxG, i-Raman Duo, and i-Raman Plus products.

607511290

Validation cap with built-in ASTM standard polystyrene. Compatible with Raman immersion shafts with a 0.5" O.D. shaft and a sapphire ball lens.

607511300

Carrying case for i-Raman NxG and i-Raman Plus. The case fits one i-Raman NxG or i-Raman Plus system, a fiber-optic probe, USB and power cables, laser goggles, and laser interlock and keys.System and accessories are not included. Case dimensions are 22 in x 17.1 in x 10.75 in.

607511600

Validation cap for see-through probe with built-in ASTM standard polystyrene.

6.1204.090

Stirrer tip for VA stands

6.1204.200

Stirrer for VA Stand, complete, metal-free

6.1204.500

Stirrer for Professional VA instruments, complete, metal-free.

6.1236.020

Sleeve with SGJ 14/12 mm and O-ring.

6.1236.030

Sleeve with SGJ 14/12 mm.

6.1236.040

For electrodes without standard ground joint.

6.1236.050

Sleeve with SGJ 14/12 mm, polyethylene.

6.1241.200

Nut for SPE electrode shaft 6.1241.090 and measuring head (SPE) 6.01256.020.

6.1241.210

Supporting ring made of PTFE for SPE electrode shaft 6.1241.090 and measuring head (SPE) 6.01256.020.

6.1244.020

For Rotating Disk Electrodes and stirrer in VA Stands (3 pieces).

6.1244.040

Set of seals for 6.1414.030. The set is comprised of one seal and various O-rings.

6.1244.050

For Professional VA/CVS instruments (3 pcs.).