Accessory Finder

6.1580.250

807 Dosing Unit with integrated data chip with 50 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread.

6.1602.105

For direct dosing from reagent bottles with GL 45 thread.

6.1602.115

For direct dosing from reagent bottles with S 40 thread (Merck...).

6.1602.125

Enables direct dosing from reagent bottles with standardized GL 45 thread.

6.1602.135

Enables direct dosing from reagent bottles with S 40 thread (Merck...).

6.1602.145

Screw cap with GL 45 thread for the 6.1608.050 drying flask.

6.1602.150

For the connection of 1/16 in. capillaries. Used in conjunction with MSM auxiliary solutions and in Metrohm Inline Sample Preparation.

6.1602.160

For eluent, reagent, and rinsing bottles, with connectors for the adsorber tube and the aspiration tubing.

6.1602.180

Adapter to the eluent bottle of the Eluent Synthesizer without pH adjustment.

6.1602.190

Eluent bottle head to connect up to 4 tubings with M6 connectors. For eluent bottle of the Eluent synthesizer.

6.1602.200

Bottle cap for eluent bottles made of PP for eluents, post-column derivatization solutions, etc. The PP eluent bottle can withstand gas pressure when this bottle cap is used.

6.1602.210

Attachment for holding up to 5 waste capillaries.

6.1602.220

Attachment for the connection of up to 7 tubings with M6 connector to 1 bottle for distributing the same solution among multiple dosing devices.

6.1608.020

Bottle for auxiliary solutions.

6.1608.023

For Exchange Units. Bottle for auxiliary solutions.

6.1608.030

6.1608.040

For Exchange Units. Bottle for auxiliary solutions.

6.1608.050

6.1608.060

6.1608.070

6.1608.080

Rinsing vessel for IC Sample Processors.

6.1608.090

6.1608.100

Bottle for Extension Module Liquid Handling.

6.1608.110

Bottle for washing solution in the IC Sample Center.

6.1608.120

Eluent bottle for applications where glass should be avoided.

6.1609.000

For filling with adsorber material.

6.1609.010

Lid with tubing nipple.

6.1613.010

6.1613.020

6.1613.030

6.1614.000

6.1614.030

Plastic bottle

6.1617.000

6.1618.000

Adapter for bottles with 32 mm thread (Fluka, Riedel de-Haen 500 mL...) to GL45

6.1618.010

Adapter for bottles with 28 mm thread (Fisher...) to GL45

6.1618.020

Adapter for bottles with S40 thread (Merck...) to GL45.

6.1618.050

Adapter for bottles with 40 mm thread to GL45.

6.1618.060

Thread adapter GL45 to GL45; e.g. for reagent bottles with extended flange

6.1619.000

6.1619.010

6.1619.020

Adsorber tube for an OMNIS cylinder unit

6.1620.000

6.1620.010

6.1621.000

As rinsing or waste container in automated systems.

6.1621.010

Eluent canister for Online-IC instruments.

6.1621.100

Cap for 10-L container. For easy and safe transportation of filled containers.

6.1621.110

Cap for 30-L canister. For easy and secure transportation of filled canisters.

6.1623.000

Bottle cap overflow protection for 1 waste bottle, prevents the waste bottle from overflowing when an aspiration pump is used

6.1624.000

Adapter SGJ 14. Part of 6.1619.010 for Dilution Sample Processor.

6.1625.010

Container for safe collection of used tools in automated systems

6.1626.000

This bottle attachment, fitted with the 6.2769.XXX sensors, results in the level sensors EMPTY and FULL, respectively, for bottles and canisters.

6.1627.000

This bottle is used with fully automatic dilution.

6.1627.100

The screw cap with septum is ideal for trace analysis due to the negligible contamination caused by the septum. Perfect for maintaining standards over a prolonged period. Screw cap with septum for PE bottle, 125 mL (6.1627.000) und PE bottle, 50 mL (6.1608.100).

6.1801.000

6.1801.080

For supplying gas to voltammetry instruments

6.1801.100

6.1801.110

6.1801.120

6.1801.130

6.1801.140

Connecting CO2 absorber cartridge and H2O adsorber cartridge of the CO2 Suppressor.

6.1803.000

To electrochemical detectors, 690 Ion Chromatograph, 698 Autosampler, 750 Autosampler

6.1803.020

For all IC instruments

6.1803.030

Capillary for inline dialysis, for Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit

6.1803.040

Capillary for sample handling in IC.

6.1803.050

Capillary for inline dialysis and filtration, for Dialysis Unit, IC Filtration Sample Processor

6.1803.070

Capillary for filtration, for IC Filtration Sample Processor, IC Liquid Handling Filtration Unit

6.1803.080

Capillary for filtration, for IC Filtration Sample Processor, IC Liquid Handling Filtration Unit

6.1803.100

Capillary for filtration and dialysis

6.1803.110

Used with the Advanced IC Dilution Sample Processor

6.1803.120

Used in the Advanced IC Dilution Sample Processor

6.1803.130

Connecting capillary from the eluent components to the Eluent Synthesizer

6.1803.140

Used with the UV/VIS Compact IC

6.1803.150

6.1803.160

PTFE capillary for use with the 920 Absorber Module.

6.1805.010

With light and kink protection.

6.1805.020

With light and kink protection

6.1805.030

With light and kink protection

6.1805.040

With light and kink protection

6.1805.050

With light and kink protection

6.1805.060

With light and kink protection

6.1805.070

With light and kink protection

6.1805.080

With light and kink protection.

6.1805.090

With light and kink protection

6.1805.100

With light and kink protection

6.1805.110

With light and kink protection

6.1805.120

With light and kink protection

6.1805.130

With light and kink protection

6.1805.150

With light protection and protection against kinks.

6.1805.160

With light protection and protection against kinks.

6.1805.170

With light protection and protection against kinks.

6.1805.180

With light and kink protection

6.1805.190

With light and kink protection

6.1805.200

6.1805.210

6.1805.220

6.1805.230

With light protection and kink protection.

6.1805.240

6.1805.420

With light and kink protection

6.1805.460

With light and kink protection

6.1805.470

With light and kink protection

6.1805.510

With protection against kinks.

6.1805.520

With light and kink protection

6.1805.530

With light and kink protection

6.1805.540

With light and kink protection

6.1805.550

With light and kink protection

6.1805.560

With light protection and kink protection.

6.1806.100

For thermal insulation of capillaries in the Compact IC plus

6.1807.010

Connector for waste tubing

6.1808.000

6.1808.010

2 M6 outer threads. Part of the screw connections for Exchange Units and 676 Sample Changer

6.1808.020

1 M6 inner thread and 1 tubing nozzle. Part of the screw connections for Exchange Units and stability measuring instruments.

6.1808.030

Together with 6.1541.010 buret tip forms the complete grounded 6.1540.010 buret tip. For titrations in non-aqueous solutions.

6.1808.040

Outer thread M6, inner thread M8.

6.1808.050

1 M8 outer thread and 1 tubing olive. E.g. for thermostat jacket of exchange units and stability measuring instruments.

6.1808.060

3 M6 inner threads.

6.1808.070

3 M8 inner threads

6.1808.080

Outer thread M8 and connection for 6 mm i.d. tubing. Prevents rinsing solutions from dripping at 727 Ti Stand

6.1808.090

Outer thread M8, inner thread M6, e.g. for mounting 6.2418.XXX Air tubes in 6.1429.XXX Reaction vessels of stability measuring instruments.

6.1808.100

For 6.5613.000 ECO titration equipment

6.1808.150

For the needle of the 774 Oven Sample Processor

6.1808.170

Distributor for installation on Sample Processors for rinsing and aspirating when using externally connected pumps.

6.1808.180

Adapter M6 inside/Luer Lock for needle connection for solution transfer

6.1808.190

For connecting the CO2 Adsorber Cartridge and H2O Adsorber Cartridge

6.1808.220

Adapter with outside thread M6 and luer connection for 6.1462.240 Transfer head for using luer tools on multi-row racks

6.1808.230

Adapter with M6 and M8 inner threads

6.1808.240

Distributor with 3 x M6, 1 x M8 and 2 x 1/8 connections for the use of rinsing and / or aspiration equipment on the 869 Compact Sample Changer.

6.1808.250

Adapter with outside thread M6 and Eppendorf conus to use with transfer head 6.1462.240 for usage of 10 mL Eppendorf tips

6.1808.260

The distributor has one inlet and four M6 openings for the connection of pump tubings.

6.1808.280

Adapter for using Port 4 of the 807 dosing Unit for connection with an FEP tubing / M6.

6.1808.290

Coupling bush M8

6.1808.310

Tubing olive to fit generator electrodes

6.1811.000

For 7 mm glass connecting pieces. Comprised of union nut, O-ring and M6 screw nipple.

6.1811.010

For 7 mm glass connecting pieces. Comprised of union nut, O-ring and M8 screw nipple.

6.1811.020

For 6.1803.020 Tubing (1.57 mm o.d.). For 708 Sampling Unit

6.1812.000

6.1815.010

For holding together different cables or tubing.

6.1816.000

Drainage tube for IC Separation Center chamber

6.1816.010

Connection tubing for stability measuring instruments.

6.1816.020

For waste tubing.

6.1816.030

Connection tubing for CO2 adsorber cartridge. For IC Dual Suppressor

6.1816.040

For pulsation absorption in post-column reactor

6.1816.060

Drainage tubing for draining off escaped liquid

6.1816.070

For the IC Sample Center

6.1816.080

Drainage tubing to the "Waste Collector".

6.1817.000

For filling the Multi-Mode-Electrode.

6.1818.000

For 681 Pump Unit and 703 Ti Stand

6.1819.000

In lid of measuring vessel in VA Stand

6.1819.010

As gas inlet in washing bottle of VA Stand

6.1819.020

For M6 threaded holes. For 6.1602.1XX bottle attachments

6.1819.030

For M8 threaded holes. For 6.1602.1XX bottle attachments and 6.1608.0XX bottles

6.1819.040

For M8 threaded holes. For 6.1563.010 thermostat jacket of 6.3011.XXX...6.3026.XXX Exchange Units

6.1819.050

For M8 threaded holes of 6.1602.10X Bottle attachments with 6.1608.030 Aspiration bottle. For 703 and 803 Ti Stand, 681 Pump Unit and 679 Rancimat

6.1819.070

PTFE. For M8 threaded holes. For 6.1602.1XX bottle attachments and tall bottles

6.1819.080

For stability measuring instruments.

6.1819.090

6.1819.100

Aspiration tubing to bottle attachment with M6 connector. For the production of eluents.

6.1819.110

Aspiration tubing to canister attachment with M6 connector. For the production of eluents.

6.1820.000

For connecting the 6.1812.XXX PTFE tubing to a G 1/4" thread.

6.1820.010

For connecting a 1/8" gas line to an M6 thread.

6.1820.020

Connector with M10 thread for 6.1812.XXX tubing and M6 thread for 6.1805.XXX tubing.

6.1820.030

Connector with M10 thread for 6.1812.XXX tubing and M8 thread for 6.1805.2XX and 6.1805.510 tubing.

6.1820.050

For 6.1826.100 pump tubing, to peristaltic pumps.

6.1820.060

6.1820.070

For extending aspiration tubing in automated systems. Connects the M8 aspiration tubing directly to the 6.1812.000 PTFE tubing.

6.1821.000

For KF Sampler

6.1821.040

Filter tube for 6.1608.050 Drying bottle. For Rancimats and Karl Fischer ovens.

6.1821.050

Filter tube for 6.1608.050 Drying bottle, 774 Oven Sample Processor.

6.1821.060

Spare part for 6.1821.070 aspiration tube

6.1821.070

For aspirating reagent in combination with 803 Ti Stand and volumetric Karl Fischer cell. The aspiration tip fits tubing with an M8 thread. The attached tubing nipple has an M10 thread.

6.1822.410

Connection capillary for sample transfer with sample changers, 1 x M6, inner diameter 0.5 mm, for trace analysis

6.1822.420

Connection capillary for sample transfer with sample changers, 1 x M6, inner diameter 0.75 mm, for the determination of organic additives with CVS

6.1823.010

For assembly in the transfer robotic arm on the Robotic Sample Processors

6.1824.000

With 4 x M6 thread. For VA measuring stands.

6.1825.210

For injection valve, with 2 PEEK pressure screws

6.1825.220

For injection valve, with 2 PEEK pressure screws

6.1825.230

For injection valve, with 2 PEEK pressure screws

6.1825.240

For injection valve, with 2 PEEK pressure screws

6.1825.250

For injection valve, with 2 PEEK pressure screws

6.1825.260

For injection valve, with 2 short PEEK pressure screws

6.1825.270

6.1825.280

6.1825.290

Sample loop for «Metrohm intelligent Partial loop Technique» (MiPT) and for PILS (particle into liquid sampler). With 2 Peek pressure screws.

6.1825.300

For injection valve, with 2 PEEK pressure screws

6.1826.020

For online IC instruments and automation in voltammetry.

6.1826.060

For Compact IC , Personal IC , Basic IC

6.1826.100

Replaces the pump tubing used with the 772 Pump Unit and the 843 Pump Station (peristaltic).

6.1826.150

For the 838 Advanced VA Sample Processor and all IC instruments with peristaltic pumps.

6.1826.160

For peristaltic pumps.

6.1826.310

Pump tubing for suppressor solutions and for acceptor solutions for inline dialysis and for inline ultrafiltration.

6.1826.320

For suppressor solutions and for acceptor solutions for inline dialysis and for inline ultrafiltration.

6.1826.330

For all IC instruments with peristaltic pump.

6.1826.340

For the sample solution in inline dialysis.

6.1826.360

For Sample Processors

6.1826.380

For Inline Dilution

6.1826.390

For the sample solution in Inline Ultrafiltration.

6.1826.420

For MSM regeneration with peristaltic pump.

6.1826.430

For the determination of antioxidants in voltammetry

6.1828.000

For 6.1621.000 canister.

6.1828.020

For connecting up to 5 tubings

6.1829.010

With M 6 thread. For Dosing Unit