Tìm kiếm phụ kiện

6.2744.270

For the connection of 1/32 inch steel capillaries

6.2744.280

6.2744.290

6.2744.300

For coupling two transfer tubings.

6.2744.310

6.2744.320

Connecting transfer tubing (M6) with capillaries (UNF 10/32).

6.2744.330

6.2744.340

For connecting up to four Dosinos with various solutions to one IC pump. For Dosino gradient applications.

6.2744.350

With UNF 10/32 connector. For the connection of PEEK capillaries in the Absorber Module.

6.2744.360

The holder enables correct preparation of the aspiration filter.

6.2745.000

For 705 UV Digester

6.2745.100

For 909 UV Digester.

6.2746.000

PP. Manual flushing pump. Used with 727 Ti Stand

6.2747.000

With blue screw cap and mL graduation. Set of 25 pieces.

6.2747.010

With blue screw cap and mL graduation. Set of 25 pieces.

6.2751.060

Made of PMMA. Safety shield for the 774 Oven Sample Processor

6.2751.070

Safety shield for the 813 Compact IC Autosampler.

6.2751.080

Safety shield for single-tower Sample Processors without 786 Swing Head.

6.2751.090

Safety shield for dual-tower Sample Processors without 786 Swing Head

6.2751.100

Safety shield for Sample Processors with 786 Swing Head

6.2751.110

Safety shield for the Advanced IC/VA Sample Processors.

6.2751.120

Safety shield for Sample Processors with 786 Swing Head and transfer set.

6.2751.130

Safety shield for safe working with needles (Compact Autosampler) and titration equipment (Compact Sample Changer).

6.2751.140

Safety shield for 874 USB Oven Sample Processor, made of PMMA.

6.2751.150

Safety shield for the Robotic Soliprep systems Filtration and Flexible, which pick up and then discard various tools at Tower 1, e.g. syringe needles. Reaching into the movement radius of the robotic arm is prevented and at the same time protection is offered against inadvertently escaping solutions.

6.2751.160

The safety shield for the left-hand work station of the Robotic Balance Sample Processor has a recess for use with the 6.2068.010 sample rack.

6.2751.190

Safety shield for 855 Robotic Titrosampler "Light"

6.2751.200

Safety shield for pipetting system with 858 Professional Sample Processor VA and CVS

6.2752.010

Used with the 717, 730, 760 Sample Changers, IC Sample Processors, 774 Oven Sample Processor

6.2752.110

6.2753.107

For 6.1429.040 or 6.1429.050 Reaction vessel. Set of 100 pieces.

6.2753.200

For collecting volatile sample components or reaction products during stability measurements. It is mounted on 6.1429.0x0 reaction vessels.

6.2753.210

For 62753200 oil separator and for applications with the scTRACE Gold.

6.2755.000

For the peristaltic pumps of IC instruments. Contact pressure adjustable.

6.2757.000

Including 8 stoppers.

6.2758.000

Mixing coils (430 μL PEEK capillary, 970 x 0.75 mm) with T connector UNF 10/32 for mixing high-pressure gradients.

6.2758.020

6.2759.000

Pump head for peristaltic pumps with 12 rollers for smoother flow

6.2760.000

For the measuring head of Professional VA/CVS instruments.

6.2761.000

The peristaltic pump runs with mounted splash protection only.

6.2762.000

6.2762.100

Replacement mixing vessel for combined rinsing and dilution stations.

6.2762.200

Transparent cover for the 6.2762.100 mixing vessel, for visual inspection in the mixing vessel.

6.2763.000

Flow-through cell for the 6.0915.100/6.0920.100 5-ring conductivity measuring cell

6.2764.000

Set of seals for Flow cell 10 mm (6.2839.130) to UV/VIS instruments

6.2765.000

Container with drainage to the "Waste Collector".

6.2766.000

Holder for fastening the absorber tubing in the Absorber Module.

6.2766.010

Holder for inlet valve to the Absorber Module.

6.2767.000

6.2768.000

6.2769.000

This sensor, mounted in the 6.1626.000 bottle attachment, results in the level sensor FULL for 1 L and 2 L bottles and for canisters. Included are two sensor rods, one inlet tubing and one holder for fixing the tubing to one of the sensor rods.

6.2769.100

This sensor, mounted in the 6.1626.000 bottle attachment, results in the level sensor EMPTY for 1 L bottles. Included are two sensor rods, one aspiration tubing and two holders for fixing the tubing to one of the sensor rods.

6.2769.110

This sensor, mounted in the 6.1626.000 bottle attachment, results in the level sensor EMPTY for 2 L bottles. Included are two sensor rods, one aspiration tubing and two holders for fixing the tubing to one of the sensor rods.

6.2769.120

This sensor, mounted in the 6.1626.000 bottle attachment, results in the level sensor EMPTY for 10 L canisters. Included are two sensor rods, one aspiration tubing and two holders for fixing the tubing to one of the sensor rods.

6.2771.000

Sleeve set for measuring vessel cover for stability measurement devices in PP.

6.2802.000

Polishing set with 1 polishing cloth and about 2 g aluminum oxide powder (grain size 0.3 µm)

6.2802.020

Polishing set to renew the surface of the Ultra Trace Electrode tip 6.1204.180

6.2802.030

Polishing tape to Polishing Set for Ultra Trace Electrode. 12 µm particle size. used in the polishing cylinder. Set of 50

6.2802.200

Tool for removing protruding PEEK materials and for subsequent polishing of working electrodes including polishing disks.

6.2802.210

Replacement polishing disks for maintenance tool for 6.1257.2XX working electrodes.

6.2803.000

Special quality (without silicone). For grease-free ground joint connections see 6.2713.XXX

6.2803.010

Special quality (without silicone). For grease-free ground joint connections see 6.2713.XXX

6.2804.030

High pressure mercury vapor lamp for 705 UV Digester. UV range 200 ... 280 nm. Operating life min. 500 h.

6.2804.060

Replacement bulb for the UV range

6.2804.090

Medium pressure mercury vapor lamp for 909 UV Digester.

6.2804.100

Spare lamp for the visible range for the 944 Professional UV/VIS Detector Vario

6.2804.110

Replacement deuterium lamp for 947 Professional UV/VIS Detector Vario SW/MW.

6.2804.120

Spare lamp for the visible range for the 947 Professional UV/VIS DetectorOnly works in conjunction with 62630010 holder for halogen lamp II

6.2811.000

Molecular sieve. Bottle containing 250 g. Pore size: 0.3 nm. Without moisture indicator. For Rancimats and Karl Fischer instruments.

6.2811.010

Molecular sieve. Bottle containing 250 g. Pore size: 0.3 nm. Without moisture indicator. For Rancimats and Karl Fischer instruments.This product is intended for all users who are US residents. The material is rated hazardous in the US in accordance with OSHA Hazard Communication Standard (29 CFR 1910.1200).

6.2813.020

Electrical simulation of a voltammetry cell, used for simulation and control purposes. For VA Detectors

6.2813.040

Dummy cell for performance tests.

6.2813.050

6.2816.020

For various applications in IC and VA

6.2816.030

Needle for filling in mercury into the Multi-Mode Electrode and for sample addition in Karl Fischer titration.

6.2816.040

With PTFE tubing and Luer connection. For syringes. For aspirating eluents.

6.2816.050

For 774 Oven Sample Processor.

6.2816.060

Used with 774 Oven Sample Processor.

6.2816.070

Used with Karl Fischer ovens.

6.2816.080

Used with KF Thermoprep and Oven Sample Processor.

6.2816.090

5 mL syringe made of PP, with Luer connector.

6.2816.100

With luer lock, for transfer equipment 6.5619.000.

6.2816.200

To IC Sample Center

6.2816.210

For the IC Sample Center

6.2816.220

For the 889 IC Sample Center Basic

6.2820.000

1,000 rondels with a diameter of 80 mm. Foil thickness: 0.010 mm. Together with 6.2037.040 foil holder for 6.1432.210 sample beaker and 6.2037.080 foil holder for 6.1459.300 sample beaker.

6.2821.090

Pore size: 27 µm. Set of 5 pieces. For aspiration tubing (6.1834.000) and filter tubes (6.1821.040) and (6.1821.050).

6.2821.120

Inline filter 2 µm

6.2821.130

Spare filter for inline filter.

6.2821.140

Holder for the Nucleosil 5SA Guard cartridge/4.0 for connection to the analytic separation column.

6.2824.050

For pump heads 6.2824.100

6.2824.060

For all pump heads

6.2824.070

Pump piston for all standard pump heads

6.2824.080

Spare part for IC pumps 709 and 818

6.2824.090

Spare part for IC pumps 709 and 818

6.2824.110

Standard pump head for intelligent IC instruments

6.2824.130

Macro pump head for intelligente IC instruments, flow range 0.1...20 mL/min, maximum pressure 12.5 MPa.

6.2824.150

Pump piston for macro pump head

6.2824.160

Metal-free check valve for the outlet side of the IC pump heads of the devices 940, 930, 925, 883, 882, 881, and 850.

6.2824.170

Metal-free check valve for the inlet side of the IC pump heads of the devices 940, 930, 925, 883, 882, 881, and 850.

6.2826.010

For the 6.0507.140 surfactant electrode

6.2831.000

For position determination

6.2831.010

For dialysis and filtration membranes

6.2832.000

Suppressor rotor for all IC instruments with MSM (Metrohm Suppressor Module)

6.2832.010

With inlets and outlets. For all IC instruments with MSM (Metrohm Suppressor Module).For replacement in Professional IC instruments of generations 850, 881, 882, and 883 (manufactured before 2017).

6.2833.000

For IC/VA Sample Processors. For 1/8 in. tubes

6.2833.010

For IC Sample Processors. For 1/16 in. tubes

6.2833.020

For Sample Processors. For the connection of FEP tubing with M6 connectors

6.2833.030

Needle holder 1/8 in. for 863 Compact Autosampler

6.2833.040

Needle holder 1/8 in. M6 for 863 Compact Autosampler

6.2835.000

Rotor for inline sample preparation with cation exchange

6.2835.010

Universal connecting piece for MSM in Professional IC Vario and Compact Flex instruments and for MSM-HC and SPM module. With inlets and outlets.

6.2837.100

Absorber cartridge for removing the CO2 from the air aspirated by the MCS. The cartridge is used without upstream H2O absorber cartridge.

6.2839.130

PEEK flow-through cell for 944 Professional UV/VIS Detector Vario

6.2839.131

PEEK flow-through cell for 947 Professional UV/VIS Detector Vario

6.2840.000

Water bath rack for Robotic Sample Processors and Titrosampler.

6.2841.000

The external rinsing station can be fitted on the side next to the Robotic Sample Processor tower, making it possible for external cleaning of the Polytron to be carried out during additional actions on the sample rack.

6.2841.010

The external rinsing station can be fitted on the side next to the Robotic Sample Processor tower, making it possible for external cleaning of the titration equipment to be carried out during additional actions on the sample rack.

6.2841.020

This set contains a rinse station for the automatic cleaning of the pipetting equipment of the OMNIS Sample Robot.The rinse station can be mounted upstream of the pump tower of the OMNIS Workstation Module. In order to function, the rinse station must be supplied with two pumps for the aspiration and extraction of solutions.

6.2841.110

Rinsing station for pipetting equipment

6.2841.120

Combined rinsing and dilution station for sample changers with a Swing Head. To be assembled to the left of the tower.

6.2841.130

Combined rinsing and dilution station for sample changers with two towers and a Swing Head. To be assembled to the right of the tower.

6.2842.000

Suppressor rotor for all IC instruments with MSM-HC (Metrohm Suppressor Module with high capacity)

6.2842.020

Not only the MSM Rotor A but also the MSM-LC Rotor A can be installed in the rotor housing with the aid of the adapter sleeve.

6.2842.100

Suppressor rotor with high capacity for hydroxide eluents for all IC instruments with MSM-HC (Metrohm Suppressor Module with high capacity).

6.2842.200

Suppressor rotor for all IC instruments with MSM-HC drive (Metrohm Suppressor Module with high capacity) for cation suppression.

6.2843.000

6.2844.000

Suppressor rotor for use with 2 mm columns.

6.2845.100

Intelligent reactor plate with reactor for PCR applications.

6.2845.110

Reactor plate with reactor for PCR applications at high temperatures (> 120 °C). With PEEK reactor capillaries.

6.2845.200

Spare reactor for the reactor plate

6.2845.210

Reactor for PCR applications at high temperatures (> 120 °C). With PEEK reactor capillaries.

6.2845.600

Intelligent column holder for the Professional Thermostat

6.2846.000

Sample needle for Sample Processors and Autosamplers in voltammetry.

6.2846.010

Sample needle for Sample Processors and Autosampler in ion chromatography. The PEEK tip guarantees secure piercing of the vial covering.

6.3002.153

6.3026.110

Exchange Unit with integrated data chip with 1 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, antidiffusion buret tip and standard amber glass reagent bottle.

6.3026.150

Exchange Unit with integrated data chip with 5 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, anti-diffusion buret tip and standard amber glass reagent bottle.

6.3026.210

Exchange unit with integrated data chip with 10 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, anti-diffusion buret tip and standard amber glass reagent bottle.

6.3026.220

Exchange unit with integrated data chip with 20 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, anti-diffusion buret tip and standard amber glass reagent bottle.

6.3026.250

Exchange unit with integrated data chip with 50 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, antidiffusion tip and standard amber glass reagent bottle.

6.3032.120

807 Dosing Unit with integrated data chip with 2 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.

6.3032.150

807 Dosing Unit with integrated data chip with 5 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.

6.3032.210

807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.

6.3032.220

807 Dosing Unit with integrated data chip with 20 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.

6.3032.250

807 Dosing Unit with integrated data chip with 50 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.

6.3033.150

5 mL dosing unit specially suitable for conveying solutions for post-column derivatization (PCR) in IC.

6.5000.000

Basic set of accessories for a Professional IC Vario or Compact IC Flex.

6.5000.010

Set of accessories for the ONE Module (IC pump with injector) for Professional IC Vario and Compact IC Flex instruments.

6.5000.020

Set of accessories for sequential suppression (SeS) for Professional IC Vario and Compact IC Flex instruments. Without Suppressor Rotor.

6.5000.030

Set of accessories for chemical suppression (ChS) for Professional IC Vario and Compact IC Flex instruments. Without Suppressor Rotor.

6.5000.200

Optional accessory kit for the IC Amperometric Detector for determinations in low-conductivity solutions.

6.5104.030

Differential amplifier with power supply.

6.5329.000

pH adjustment to Eluent Synthesizer. Includes pH electrode and additional accessories.

6.5330.040

Accessories set for mounting a Dosino on intelligent IC instruments for Liquid Handling.

6.5330.090

Accessory set for Eluent Production Module. Contains all parts necessary for expansion by one eluent. The level sensor must be ordered in accordance with the application.

6.5330.100

Accessory set for Inline Dialysis. For use with the 858 Professional Sample Processor and an additional 2-channel peristaltic pump.

6.5330.120

Accessory set for Inline Dilution. For use with the 858 Professional Sample Processor, 800 Dosino and 741 Magnetic Stirrer.

6.5330.130

Accessory set for assembling the Liquid Handling Station on the Professional Sample Processor. The rinsing water supply can be accomplished by means of a peristaltic pump or a Dosino.

6.5330.140

Accessory set for Inline Preconcentration (MiPCT) including Liquid Handling Station, left.

6.5330.150

Accessory set for assembling the Dose-in Gradient for anion analyses.

6.5330.160

Accessory set for assembling a Dosino for Metrohm intelligent Preconcentration Technique with Matrix Elimination (MiPCT-ME).

6.5330.170

Accessory set for assembling a Dosino for sample pick-up (Metrohm intelligent Pick-up Injection Technique).

6.5330.180

Accessory set for assembling a Dosino for Partial-Loop-Injection.

6.5330.190

Accessory set for the assembly of a Dosino for automatic regeneration of the Metrohm Suppressor Module (MSM).

6.5330.200

Accessory set for rapid Inline Dialysis. For use with the 858 Professional Sample Processor and an additional two-channel peristaltic pump.

6.5330.400

The IC equipment: PCR with dosing unit makes it possible to convey a PCR reagent with the 800 Dosino, for example for the photometric determination of UV/VIS-active components after post-column derivatization.

6.5332.000

6.5332.010

6.5333.000

The IQ/OQ Kit contains all parts and standard solutions required for IQ/OQ in ion chromatography.

6.5334.020

Accessory set for two auxiliary solutions for expanding semiautomated Professional VA systems. Contains one ground adapter for two Dosino instruments and one connection cable.

6.5336.000

Waste Collector for up to five waste capillaries.

6.5337.210

Equipment comprising Thin-Layer cell with additional accessories, with electrodes for carbohydrate analysis with a gold working electrode and a Pd reference electrode.

6.5339.500

Accessory set for 2 auxiliary solutions for expanding VA or CVS systems. Contains 2x 807 Dosing Units 2 mL, 2x 100 mL clear glass bottles, bottle holder for 2 bottles, and connector material. Without Dosinos.

6.5339.510

Accessory set for 2 auxiliary solutions for expanding manual VA systems. Includes one 807 Dosing Unit 2 mL and one 807 Dosing Unit 5 mL, clear glass bottles 100 mL, 250 mL and 2 L, bottle holders for 2 bottles, one 4-way micro tip, and connector material. Without Dosinos.

6.5339.520

Accessory set for two auxiliary solutions for expanding CVS systems. Includes one 2 mL and on 50 mL 807 Dosing Unit each, clear glass bottles 100 mL and 2 L, bottle holders for 2 bottles, one 2-way microtip, and connector material. Without Dosinos.

6.5339.600

Accessory set for expanding VA or CVS systems for automatic sample transfer with the Dosino. Includes one 5 mL 807 Dosing Unit, one Dosino holder and connector material. Without Dosino.

6.5339.620

Accessory kit for fully automated CVS pipetting system in combination with the 858 Professional Sample Processor. Contains one 807 Dosing Unit 5 mL and 50 mL each, clear glass bottles 2 L, pipetting tubing, rinsing station, safety shield and other accessories. Without Dosinos.

6.5340.010

Measuring stand for the scTRACE Gold, complete, comprising a base plate, transparent ring, and measuring head.

6.5340.020

Measuring stand for screen-printed electrodes (SPE), comprising a base plate, transparent ring, and measuring head.

6.5406.000

Complete accessory set for KF coulometer.

6.5406.010

Complete accessory set for KF coulometer.

6.5609.000

Karl Fischer equipment for volumetry, complete set of accessories for Karl Fischer water determination

6.5610.010

Karl Fischer equipment for 810 or 814 Sample Processor.

6.5611.100

Pipetting equipment (10 mL) for 665, 765 Dosimats.

6.5613.000

ECO semi-micro titration equipment

6.5616.100

Set for exact temperature adjustment

6.5616.110

Set for exact temperature adjustment

6.5617.000

Equipment for automatic reagent replacement with KF coulometer and connected Dosino.

6.5618.000

Measuring equipment for checking the temperature of 774 Oven Sample Processor, 832, 860 Thermoprep.

6.5619.000

Complete equipment for the transfer of solutions from 0.5 to 2.0 mL on the Robotic Sample Processor.

6.5620.000

For the connection of an M6 tubing to Port 4 on an 807 Dosing Unit (transition from luer to M6), including holder safety device

6.5621.000

For usage of 869 Compact Sample Changer or 862 Compact Titrosampler in combination with a pump for rinsing/aspiration.

6.5622.000

Accessories set for the connection of a second 843 Pump Station with external washing station to 864 Robotic Balance Sample Processor

6.5623.000

Replacement set for the O2 Lumitrode. The set contains a certified O2 cap as replacement, a calibration vessel, and 5 x 30 mL oxygen standard, 0%.

6.5702.010

FEP tubing connection M6 (13, 25 and 40 cm) and antidiffusion tip for 6.3026.xxx exchange units and 6.3032.xxx dosing units.

6.5703.010

Assembly of important expendable items for ion chromatography.

6.5703.020

Assembly of important expendable items for CVS applications with Professional CVS instruments.

6.5706.010

Assembly of important expendable items for the Biodiesel Rancimat.

6.5706.020

Assembly of important expendable items for the Rancimat.