Tìm kiếm phụ kiện

6.5865.600

Initial installation kit of the ceramic combustion tube for the Combustion Module (Oven + ABD, AJ). Contains the suitable heat guard for the usage of the ceramic combustion tube CIC AJ.

6.5904.030

Rotor for the 6/2 injector in IC systems.

6.5904.050

Flat plate injector with 0.25 µL internal loop

6.5904.060

Rotor for 4-port flat plate injector (6.5904.050), 0.25 µL internal loop

6.5904.070

Rotor for 4-port flat plate injector (6.9956.001), 1.0 µL internal loop

6.5904.210

Stator for the 6/2 injector in IC systems.

6.5904.220

Stator for 4-port valve (internal loop injector, 6.5904.050 and 6.9959.001),

6.7301.180

Finger-Tight for gas connection on the Automatic Boat Driver

6.7301.200

Guide tubing for Automatic Boat Driver of the Combustion Module (ABD serial numbers starting with 1709591)

6.7301.270

The wrench is used for assembly/disassembly of the combustion tube in the ABD.

6.7301.280

Cover hood for protecting the samples on the ABD/MMS 5000 against contamination.

6.7301.300

Ceramic combustion tube for the Combustion Module (Oven + ABD, AJ).

6.7301.310

Outer tube of the ceramic combustion tube for the Combustion Module (Oven + ABD, AJ).

6.7301.320

Connecting tube of the ceramic combustion tube for the Combustion Module (Oven + ABD, AJ).

6.7301.330

Ceramic inlay of the ceramic combustion tube for the Combustion Module (Oven + ABD, AJ).

6.7301.340

Frit of the ceramic combustion tube for the Combustion Module (Oven + ABD, AJ).

6.7301.350

Clamping screw of the ceramic combustion tube for the Combustion Module (Oven + ABD, AJ).

6.7301.360

Union nut of the ceramic combustion tube for the Combustion Module (Oven + ABD, AJ).

6.7302.000

Kit for solid samples for MMS 5000 with rack for sample boats, grippers and 10 quartz glass boats.

6.7302.200

Gripper for solid changer setup MMS 5000

6.7302.300

Boat sensor for ABD in the Combustion IC system.

6.7302.310

For solids.

6.7303.000

Kit for liquid samples for MMS 5000 with rack for sample vessels, 100 µL syringe with replaceable needle and 100 snap-ring bottles.

6.7303.300

Reservoir for rinsing the sample needle on the Autosampler MMS 5000 with liquids kit.

6.7303.310

For liquid samples.

6.7304.020

Connection tubing for gas supply for the Combustion Module

6.7304.030

Connector for connecting the LPG/GSS module (AJ) to the combustion oven. For Metrohm Combustion IC.

6.7305.000

Blower vessel for LPG/GSS Module.

6.7305.010

Screw connector for fastening to the blower vessel.

6.7305.050

T-connector with two 6/4 mm, 10 cm and 70 cm connection tubings

6.7400.000

Accessory kit for NIRS XDS laboratory monochromators

6.7400.010

The NIRS Liquid Sample Kit Transflection supplements the following instruments with the function of the transflection measurement of liquids:NIRS DS2500 Analyzer (order number: 2.922.0010); NIRS XDS MasterLab Analyzer (order number: 2.921.1310); NIRS XDS MultiVial Analyzer (order number: 2.921.1120); NIRS XDS RapidContent Analyzer (order number: 2.921.1110); NIRS XDS RapidContent Analyzer - Solids (order number: 2.921.1210);

6.7400.030

Accessory kit for NIRS DS2500 Analyzer

6.7401.000

Optically flat transflection vessel for the spectral measurement of liquids. Can be used in combination with the following instruments:NIRS DS2500 Analyzer (order number: 2.922.0010); NIRS XDS MasterLab Analyzer (order number: 2.921.1310); NIRS XDS MultiVial Analyzer (order number: 2.921.1120); NIRS XDS RapidContent Analyzer (order number: 2.921.1110); NIRS XDS RapidContent Analyzer - Solids (order number: 2.921.1210);

6.7401.040

Quartz cuvette, screw top, with 20 mm pathlength for the recording of a spectrum of volatile liquids in transmission using an NIRS XDS RLA Analyzer.

6.7401.110

Open quartz cuvette with 0.5 mm pathlength for the recording of a spectrum of liquids in transmission using an NIRS XDS RLA Analyzer.

6.7401.200

Quartz glass cuvette with a window made of quartz glass of maximum purity and homogeneity. The cuvettes have a transmission of more than 80% in the wavelength range of 200–2500 nm.Compatible with:NIRS Spacer for set of 12.5 mm cuvettes (6.7403.180); DS2500 holder for 1 mm cuvette (6.7492.100); Holder OMNIS NIR, cuvette, 1 mm (6.07401.010);

6.7401.210

Quartz glass cuvette with a window made of quartz glass of maximum purity and homogeneity. The cuvettes have a transmission of more than 80% in the wavelength range of 200–2,500 nm.Compatible with:NIRS Spacer for set of 12.5 mm cuvettes (6.7403.180); DS2500 holder for 2 mm cuvette (6.7492.110); Holder OMNIS NIR, cuvette, 1 mm (6.07401.010) ;

6.7401.220

Quartz glass cuvette with a window made of quartz glass of maximum purity and homogeneity. The cuvettes have a transmission of more than 80% in the wavelength range of 200–2500 nm.Compatible with:NIRS Spacer for set of 12.5 mm cuvettes (6.7403.180); DS2500 holder for 5 mm cuvette (6.7492.120); Holder OMNIS NIR, cuvette, 5 mm (6.07401.030);

6.7401.230

Quarzglasküvette mit einem Fenster aus Quarzglas in höchster Reinheit und Homogenität. Die Küvetten haben eine Transmission von über 80% im Wellenlängenbereich von 200 nm - 2500 nm.Kompatibel mit:NIRS Spacer für 12.5 mm Küvettenset (6.7403.180); DS2500 Halter für 10 mm Küvette (6.7492.130); Halter OMNIS NIR, Küvette, 10 mm (6.07401.040) ;

6.7401.300

Flow quartz cuvettes with quartz glass window and an optical path length of 0.5 mm suitable for near-infrared spectroscopy (NIRS) analyses.Compatible with:Holder OMNIS NIR, flow-through cell (6.070401.100); DS2500 holder for flow cells (6.7493.000);

6.7401.310

Flow quartz cuvettes with an optical path length of 1.0 mm suitable for near-infrared spectroscopy (NIRS) analyses.Compatible with:Holder OMNIS NIR, flow-through cell (6.07401.100); DS2500 holder for flow cells (6.7493.000) ;

6.7401.320

The flow quartz cuvettes enable continuous monitoring, for example of tablet disintegration processes and reaction kinetics. The high pressure resistance and a special bubble capturing system make all measurements particularly easy.Windows made of quartz glass of maximum purity and homogeneity ensure a transmission of more than 80% in the wavelength range of 200 nm - 2,500 nm.A variety of pathlengths are available:0.5 mm pathlength and a volume = 175 μL (order number: 67401300)1 mm pathlength and a volume = 350 μL (order number: 67401310)2 mm pathlength and a volume = 700 μL (order number: 67401320)5 mm pathlength and a volume = 1,750 μL (order number: 67401330)10 mm pathlength and a volume = 3,500 μL (order number: 67401340)Dimensions h x l x w = 35 mm x 12.5 mm x 12.5 mmWindow height = 8.5 - 15 mmCompatible with the NIRS spacer for the XDS RapidLiquid Analyzer and the DS2500 holder for the DS2500 Liquid Analyzer.

6.7401.330

The flow quartz cuvettes enable continuous monitoring, for example of tablet disintegration processes and reaction kinetics. The high pressure resistance and a special bubble capturing system make all measurements particularly easy.Windows made of quartz glass of maximum purity and homogeneity ensure a transmission of more than 80% in the wavelength range of 200 nm - 2,500 nm.A variety of pathlengths are available:0.5 mm pathlength and a volume = 175 μL (order number: 67401300)1 mm pathlength and a volume = 350 μL (order number: 67401310)2 mm pathlength and a volume = 700 μL (order number: 67401320)5 mm pathlength and a volume = 1,750 μL (order number: 67401330)10 mm pathlength and a volume = 3,500 μL (order number: 67401340)Dimensions h x l x w = 35 mm x 12.5 mm x 12.5 mmWindow height = 15 mmCompatible with the NIRS spacer for the XDS RapidLiquid Analyzer

6.7401.340

The flow quartz cuvettes enable continuous monitoring, for example of tablet disintegration processes and reaction kinetics. The high pressure resistance and a special bubble capturing system make all measurements particularly easy.Windows made of quartz glass of maximum purity and homogeneity ensure a transmission of more than 80% in the wavelength range of 200 nm - 2,500 nm.A variety of pathlengths are available:0.5 mm pathlength and a volume = 175 μL (order number: 67401300)1 mm pathlength and a volume = 350 μL (order number: 67401310)2 mm pathlength and a volume = 700 μL (order number: 67401320)5 mm pathlength and a volume = 1,750 μL (order number: 67401330)10 mm pathlength and a volume = 3,500 μL (order number: 67401340)Dimensions h x l x w = 35 mm x 12.5 mm x 12.5 mmWindow height = 15 mmCompatible with the NIRS spacer for the XDS RapidLiquid Analyzer

6.7402.020

The disposable backs are used for the secure sealing of the mini sample cups. The sample cups are used in the following:NIRS DS2500 Analyzer (order number: 2.922.0010); NIRS XDS MasterLab Analyzer (order number: 2.921.1310); NIRS XDS RCA Analyzer (order number: 2.921.1110); NIRS XDS MultiVial Analyzer (order number: 2.921.1210); The package is comprised of 100 disposable backs.

6.7402.030

Mini sample cup for the spectral recording of powders and granulates in reflection. The sample cup can be sealed with disposable backs in order to avoid sample loss and for the uniform distribution of the powder or granulate in the sample cup.The sample cups are used with the following instruments:NIRS DS2500 Analyzer (order number: 2.922.0010); NIRS XDS MasterLab Analyzer (order number: 2.921.1310); NIRS XDS MultiVial Analyzer (order number: 2.921.1120); NIRS XDS RapidContent Analyzer (order number: 2.921.1110); NIRS XDS RapidContent Analyzer - Solids (order number: 2.921.1210);

6.7402.040

NIRS XDS coarse granular sample cell for the reflection measurement of samples with different surface properties.

6.7402.050

Large sample cup for the spectral recording of powders and granulates in reflection at various sample positions using the NIRS DS2500 Analyzer.

6.7402.060

Set of five large sample cups for the spectral measurement of powders and granulates in reflection using the NIRS DS2500 Analyzer.

6.7402.070

200 lockable disposable glass vials (borosilicate) with a diameter of 2 mm for analyses of liquids in transmission mode.Compatible with:Holder OMNIS NIR, vial, 2 mm (6.07401.050); DS2500 holder for flow cells (6.7492.000);

6.7402.100

195 lockable disposable glass vials (borosilicate) with a diameter of 10 mm for analyses of liquids in transmission.Compatible with:Holder OMNIS NIR, vial, 10 mm (6.07401.080); DS2500 holder for 4 mm disposable vials (6.7492.030);

6.7402.110

123 lockable disposable glass vials with a diameter of 15 mm for analyses of solids in reflection. Suitable for NIRS RapidContent (Solid) Analyzers of the XDS, DS2500 and OMNIS product families.

6.7402.120

225 lockable disposable glass vials with a diameter of 19 mm for analyses of solids in reflection. Suitable for NIRS RapidContent (Solid) Analyzers of the XDS, DS2500 and OMNIS product families.

6.7402.130

172 lockable disposable glass vials with a diameter of 22 mm for analyses of solids in reflection. Suitable for NIRS RapidContent (Solid) Analyzers of the XDS, DS2500 and OMNIS product families.

6.7402.140

216 lockable disposable glass vials with a diameter of 28 mm for analyses of solids in reflection. Suitable for the following analyzers:NIRS DS2500 Analyzer; NIRS XDS RapidContent (Solid) Analyzer; NIRS XDS MultiVial Analyzer; NIRS XDS MasterLab Analyzer;

6.7402.150

Lid for the large sample vessel for the DS2500 Analyzer.

6.7402.200

123 stoppers for 15 mm Reflection disposable vials.

6.7402.210

225 stoppers for 19 mm Reflection disposable vials.

6.7402.220

172 stoppers for 22 mm Reflection disposable vials.

6.7402.230

216 stoppers for 28 mm Reflection disposable vials.

6.7402.240

100 disposable glass vials (borosilicate) with an optical path length of 8 mm for analyses of liquids in transmission. The disposable vials are supplied with the associated stoppers (number of pieces = 100).Compatible with:Holder OMNIS NIR, vial, 8 mm (6.07401.070); DS2500 holder for 8 mm disposable vials (6.7492.020) ;

6.7402.250

200 disposable glass vials (borosilicate) with an optical path length of 4 mm for analyses of liquids in transmission. Compatible with:Holder OMNIS NIR, vial, 4 mm (6.07401.060); DS2500 holder for 4 mm disposable vials (6.7492.010);

6.7402.260

100 stoppers for 4 mm transmission disposable vials (6.7402.250).

6.7403.000

Spacer for disposable glass vials with 8 mm diameter.

6.7403.010

Spacer for disposable glass vials with 4 mm diameter

6.7403.020

Spacer for the disposable glass vials with 2 mm diameter.

6.7403.030

Spacer for the disposable glass vials with 10 mm diameter.

6.7403.110

Spacer for fixing open quartz cuvettes with 0.5 mm total pathlength in an NIRS XDS RLA Analyzer.

6.7403.180

The NIRS Spacer for 12.5 mm cuvette set ensures spacers for an optimum position of the cuvette in the sample holder.

6.7404.000

Aperture plate for reducing the spot size to 4.5 mm, in particular for analyzing tablets with the aid of the XDS MasterLab Analyzer.

6.7410.000

A reflection standard is required for the calibration of the monochromator with the sample module. A holder in which the standard is positioned is used to fasten the calibration standard in place. A reflection standard and its associated holder are required for:NIRS XDS MultiVial Analyzer (order number: 29211210); NIRS XDS MasterLab Analyzer (order number: 2.921.1310);

6.7410.010

NIRS MultiVial tray for 4x5 15 mm vials

6.7410.020

NIRS MultiVial tray for 3x5 19 mm vials

6.7410.030

NIRS MultiVial tray for 3x5 22 mm vials

6.7410.040

NIRS MultiVial tray for 2x3 27 mm vials

6.7410.050

NIRS MultiVial tray for 2x3 29 mm vials

6.7410.090

NIRS tablet tray for different tablet shapes

6.7410.110

The NIRS FlexiTray permits maximum flexibility when analyzing tablets and capsules. A variety of forms are reproducibly positioned with the aid of the spring mechanism in order to ensure accurate and precise measurement results at all times.

6.7420.000

Gold diffuse reflector for the transflection measurement of liquids. Can be used in combination with the following instruments:NIRS DS2500 Analyzer (order number: 2.922.0010); NIRS XDS MasterLab Analyzer (order number: 2.921.1310); NIRS XDS MultiVial Analyzer (order number: 2.921.1120); NIRS XDS RapidContent Analyzer (order number: 2.921.1110); NIRS XDS RapidContent Analyzer - Solids (order number: 2.921.1210);

6.7420.010

Gold diffuse reflector for the transflection measurement of liquids. Can be used in combination with the following instruments:NIRS DS2500 Analyzer (order number: 2.922.0010); NIRS XDS MasterLab Analyzer (order number: 2.921.1310); NIRS XDS MultiVial Analyzer (order number: 2.921.1120); NIRS XDS RapidContent Analyzer (order number: 2.921.1110); NIRS XDS RapidContent Analyzer - Solids (order number: 2.921.1210);

6.7420.020

Gold diffuse reflector for the transflection measurement of liquids. Can be used in combination with the following instruments:NIRS DS2500 Analyzer (order number: 2.922.0010) NIRS XDS MasterLab Analyzer (order number: 2.921.1310) NIRS XDS MultiVial Analyzer (order number: 2.921.1120) NIRS XDS RapidContent Analyzer (order number: 2.921.1110) NIRS XDS RapidContent Analyzer - Solids (order number: 2.921.1210)

6.7425.000

Iris for focusing mini sample vessels, reflection standard, various vials or a transflection vessel in the NIRS XDS RCA Analyzer, the NIRS XDS MasterLab Analyzer and the NIRS XDS MultiVial Analyzer

6.7425.100

The iris for the DS2500 with a variably adjustable diameter of up to 36 mm enables you to perform flexible reflection measurement investigations of samples in vials.The iris for the DS2500 is used in the holder for small sample vessels. Order number: 6.7430.040

6.7430.000

Spare lamp with 12 V and 50 W for the monochromator of the NIRS XDS laboratory instruments

6.7430.010

NIRS XDS spare parts kit of the lab instrument is comprised of two spare lamps, two fan filters and four fuses.

6.7430.030

NIRS transmission pair calibration fixture

6.7430.040

Holder for use with:Small sample vessels (6.7402.030); DS2500 Iris (6.7425.100);

6.7430.050

Spare lamp with 12.0 V and 35 W for NIRS DS2500 Analyzer

6.7430.060

Cleaning cloth for monitors and optics.

6.7430.080

The interchangeable probe set consists of a reflection probe, a transflection probe and various spacers, including fixing screws for setting variable path lengths (2 cm, 4 cm, 5 cm, and 10 cm). A protective sleeve for the probes, an Allen wrench, and a sealing ring are also included with the set.This set is part of the XDS SmartProbe Analyzer and the XDS Interactance Optiprobe Analyzer.

6.7440.170

One-channel optical fiber in 2 m length for NIRS Process Analyzers

6.7440.480

I/O Communication box for process instruments with 24 analog and 24 digital channels

6.7440.580

Transmission reference for the calibration of the XDS MasterLab for transmission measurements.

6.7450.000

Set of wavelength standard and 80% reflection standard for the calibration of an NIRS XDS MasterLab Analyzer, NIRS XDS RCA Analyzer, NIRS XDS MultiVial Analyzer, NIRS XDS SmartProbe Analyzer, NIRS XDS Interactance OptiProbe Analyzer and NIRS DS2500 Analyzer.

6.7450.010

Set comprised of six reflection standards and one wavelength standard for the calibration of an NIRS XDS MasterLab Analyzer, NIRS XDS RCA Analyzer, NIRS XDS MultiVial Analyzer, NIRS XDS SmartProbe Analyzer, NIRS XDS Interactance OptiProbe Analyzer and NIRS DS2500 Analyzer in regulated environments.

6.7450.020

NIRS transmission standard for the spectral measurement of tablets in the NIRS XDS MasterLab Analyzer

6.7450.030

Certified 99% reflection standard for calibration of an NIRS XDS SmartProbe Analyzer

6.7450.040

Transmission wavelength calibration standard for NIRS XDS RLA Analyzer and NIRS XDS Transmission OptiProbe Analyzer

6.7450.070

NIRS 99% reflection and wavelength standard for process instrument with 1 inch probe diameter

6.7450.080

NIRS 99% reflection and wavelength standard for process instrument, 0.5 inch probe diameter

6.7450.090

NIRS 99% reflection and wavelength standard for process instrument with 1 inch diameter and 45° angle

6.7450.130

Certified wavelength and transmission standards (0.25 AU, 0.5 AU, 1 AU, 1.5 AU and 2.0 AU) for NIRS XDS RapidLiquid Analyzer and NIRS XDS Transmission OptiProbe Analyzer in regulated environments.

6.7490.430

The Slurry Cup is the ideal sample cup for analyzing high-viscosity substances with the DS2500. The positioning of pastes and creams in the Slurry Cup is made simple by its open design, which also permits rapid and effective cleaning.In combination with the Liquid Kit (6.7400.010), clear viscous samples can also be investigated.

6.7490.440

DS2500 MultiSample Cup for nine 15 mm vials.

6.7490.450

DS2500 MultiSample Cup for eight 19 mm vials.

6.7490.460

DS2500 MultiSample Cup for seven 22 mm vials.

6.7490.470

DS2500 MultiSample Cup for six 28 mm vials.

6.7490.480

Lid (black) for the large sample cup for the DS2500 Analyzer.

6.7492.000

Intelligent holder for disposable glass vials with 2 mm diameter

6.7492.010

Intelligent holder for disposable glass vials with 4 mm diameter

6.7492.020

Intelligent holder for disposable glass vials with 8 mm diameter

6.7492.030

Intelligent holder for disposable glass vials with 10 mm diameter

6.7492.100

Intelligent holder for 12.5 mm cuvettes with a path length of 1 mm

6.7492.110

Intelligent holder for 12.5 mm cuvettes with a path length of 2 mm

6.7492.120

Intelligent holder for 12.5 mm cuvettes with a path length of 5 mm

6.7492.130

Intelligent holder for 12.5 mm cuvettes with a path length of 10 mm

6.7493.000

Intelligent holder for 12.5 mm flow cells

6.7494.000

Intelligent transmission wavelength calibration standard for the DS2500 Liquid Analyzer

6.7494.500

DS2500 Liquid Analyzer Heat Protection as optional protection for analysis at high temperatures.

6.7502.000

Glass vials suitable for use with Mira M-1 Basic and Advanced Package.

6.7502.010

Glass vials for use with MIRA systems. 15 mm x 26 mm.144 glass vials are included in the scope of delivery.

6.7502.100

Vial Holder for use with the Mira M-1 Advanced Package.

6.7503.100

MIRA Protective Boot provides an extra layer of safety to MIRA devices. Made with a chemically resistant TPA material and specially designed to work with all SmartTip Attachments, the protective boot easily installs for a ruggedized feel and extra protection.

6.7503.110

PowerPack Protective Boot provides an extra layer of safety to PowerPack. Made with a chemically resistant TPA material and specially designed to work with Mira, the protective boot easily installs for a ruggedized feel and extra protection.

6.7503.120

Autofocus Standoff Grip Kit includes a picatinny rail, grip and mounting hardware for the AFSO.

6.7503.130

Autofocus Standoff Quick Release Mount is for standard picatinny rail mounting of the AFSO.

6.7520.000

Point-and-Shoot Adapter (SWD) for the Mira M-1 Advanced Package with a focal length of 1.00 mm.

6.7520.010

Point-and-Shoot Adapter (LWD) for the Mira M-1 Advanced Package with a focal length of 7.6 mm.

67530070

Wrist Strap for the Metrohm TacticID-1064 ST.

6.7550.000

ABS/TiO2 standard for the calibration of the wavenumber scale of the Mira spectrometers.

6.7560.010

Proper laser safety precautions should be followed for the use of the MIRA products. Protection pursuant to EN 207 is offered with these protective glasses for the 785 nm laser excitation wavelength (also suitable for those who already wear eyeglasses). Work for long periods without difficulties, thanks to the lightweight construction and comfortable design of the protective laser glasses.

67560050

Laser Safety Goggles, 1064 nm Wavelength.

6.7560.200

MIRA PowerPack Kit contains the MIRA PowerPack rechargeable external battery, a charger with USB-C socket, and a charger cable with USB-C plug. Designed for MIRA systems, the kit increases the period of usable charge to more than 8 hours.

6.7600.010

Drip pan for 898 XYZ Sample Changer.

6.7600.020

Rinsing station holder for 898 XYZ Sample Changer.

6.7600.030

Rinsing station for 898 XYZ Sample Changer.

6.7600.040

898 XYZ Sample Changer tubing guide

6.7600.050

898 XYZ Sampler Changer titration head holder

6.7600.060

898 XYZ Sample Changer safety shield

6.7600.070

898 XYZ Sample Changer rinse and extraction kit (FEP/TYGON).

6.7600.080

898 XYZ Sample Changer rinse reduction kit.

6.7600.090

898 XYZ Sample Changer 24 volt power supply unit.

6.9001.040

6.9001.050

Thermal paper 60 mm / 25 m for Custom Neos-N / Q3X. New: 25-year legibility with correct storage.1 roll

6.9001.060

Paper width: 76 mm, Paper length: 60 m

6.9001.070

Paper roll for TX-900MH impact printer

6.9001.080

Self-adhesive paper roll for TX-900MH impact printer

6.9002.050

Ink Ribbon

6.9002.060

Number of characters: 3 million

6.9002.070

6.9012.000

Standard dispersing aggregate for Polytron 1300 D

6.9012.010

Special dispersing aggregate (Metrohm version) with protruding knives

6.9013.000

The ionisation rod is mounted with the holder (6.2057.160) to the 864 Robotic Balance Sample Processor.

6.9014.000

To remove the air bubbles prior to analysis.

6.9015.000

6.9015.010

6.9015.020

6.9914.137

Titration head for use in the CSB System (MATi 12). The titration head offers three retracted tubings with antidiffusion valve and one for aspiration of the titrated solution. The electrode can be fastened in place in an M10 screw connector. As before, three openings are provided for spray nozzles.

6.9914.139

Titration head with 3 reinforced buret tips, one M10 screw connection and one opening for an assembly (Polytron PT 1300 D).

6.9914.140

Robotic arm with holder for one titration head and one Polytron, for use with a 786 Swing Head.

6.9914.158

Titration head to 814 USB Sample Processor or for use in robotic arms with holder for titration head.

6.9915.078

The 25 mL transfer tubing can be coiled up neatly and mounted on the guide chain of the Sample Processor with the help of the holder.

6.9915.079

The 25 mL 2x M8 transfer tubing is mounted to the guide chain of the Sample Processor with the help of the 6.9915.078 holder

6.9920.141

Sample rack for 815 Robotic USB Sample Processor XL, 855 Robotic Titrosampler "Basic", suitable for 53 sample beakers. The following sample beakers can be used: 6.1459.300, 6.1459.307.Plastic: Polypropylene (PP)

6.9920.191

Sample rack for 858 Professional Sample Processor, 815 Robotic USB Sample Processor XL, suitable for 35 sample vessels and 3 rinsing bottles. The following sample vessels and rinsing bottles can be used: 6.1608.100, 60 mL and 250 mL Nalgene FEP vessels.Plastic: Polyvinyl chloride (PVC)

6.9920.231

Plate for deflecting the vessel cover on the Professional IC Sample Processor. For 2 mL sample vessels.

6.9920.252

6.9920.255

Multi-row sample rack for 25 samples in 60 mL Corning® cell culture flasks and 10 samples in 125 mL PE bottles (6.1627.000). Dedicated sample rack for trace analysis, e.g. in power plants.

6.9920.261

Holder for mounting a thermostatable titration vessel in the vicinity of the tower

6.9920.287

Sample rack for 858 Professional Sample Processor, 815 Robotic USB Sample Processor XL, suitable for 109 sample vessels and 12 standard bottles. The following sample vessels and standard bottles can be used: 6.2743.050, 6.1627.000, 6.2743.040.

6.9927.028

Safety shield for 815 Robotic USB Sample Processor XL (2T/0P). Is utilized in IC when sample needles are used.

6.9927.031

6.9958.007

Overflow buret for rapid and automatic measuring of 100 mL of sample and for sample transfer into an external titration vessel.

6.9958.125

Titration head extension to 855 Robotic Titrosampler "Light" for using the

6.9959.001

Flat plate injector with 1.0 µL internal loop

A649281190

Replacement lamp with contact for NIRS Process instruments. 50W, 12 Volt- White lead.

A660044277

Replacement lamp for the NIRS Analyzer Pro (12V/20W)

ADC10M.S

The ADC10M module is an ultra-fast sampling module that increases the sampling rate of the Autolab from 50 kSamples/s to 10 MSamples/s giving you the ability to acquire fast transients with intervals down to 100 ns.When combined with the SCAN250 module, you can perform ultra-fast cyclic voltammetry measurements with scan rates up to a practical limit of 250 kV/s, making it a powerful tool for studying fast kinetic processes.

ALL.CLIP.BLACK

Black alligator clamp for connections to electrodes in the electrochemical cell.

ALL.CLIP.RED

Red alligator clamp for connections to electrodes in the electrochemical cell.

AUT101.CASE

The PGSTAT101 field case is designed to conveniently store or carry the Autolab PGSTAT101 and its components. The field case for PGSTAT101 provides room for the PGSTAT101, power cable, cell cable, monitor cable, NOVA Getting Started Manual and NOVA installation CD.

AUT204.CASE

The PGSTAT204 field case is designed to conveniently store or carry the Autolab PGSTAT204 and its components. The field case for PGSTAT204 provides room for the PGSTAT204, power cable, dummy cell, cell cable, monitor cable, NOVA Getting Started Manual and NOVA installation CD.

AUT.COIN2.HLD.S

The Autolab DuoCoin Cell Holder has 4-point Kelvin gold-plated contacts to assure the highest precision measurements for your battery research. A versatile accessory that can accommodate all standard cells sizes with capacity for smaller and larger non-standard cells and two cells can be processed at one time.Autolab DuoCoin Cell Holder gold plated contacts and gold plated PCB provide protection from corrosion and damage to the accessory in your busy laboratory.Experimental set up is simplified with the Autolab DuoCoin Cell Holder with visible electrode labels and cable connections that correspond to the Autolab potentionstat/galvanostat cable colors. Autolab’s attention to detail is reflected in the silicon surface grippers on the bottom of the Autolab DuoCoin Cell Holder to provide stability in a complex experiment set up.

AUT.DUMCELL.S

Dummy cell for instrument testing.

AUT.FIBER.200.UVIR

The Autolab spectrophotometer and light source are designed to connect to the electrochemical cell or cuvette holder using optical fibers. The standard dimensions of the optical fibers is 2 m in length and 200 μm in diameter. The fibers are fitted with SMA-905 connectors on both ends.

AUT.LED.BENCH.S

Optical bench for measurements on photovoltaic devices. The allows for positioning of light source and detector.

AUT.LED.DRIVER.S

Software controlled LED Driver for control of light source intensity. The LED Driver provides a maximum current of 700 mA and it can be used to power the LED lightsource provided with the Autolab LED Driver kit. The LED Driver can be programmed to provide a constant light output or a modulated light output.

AUT.LEDKIT.S

The Metrohm Autolab optical bench provides the means to study the electrochemical behavior of photovoltaic cells, like dye sensitized solar cells. The light source used in this setup is a highly focused LED. The bench includes a software programmable LED Driver which can be used to control the light source output.The light source itself is fitted with a quick release system, allowing a fast exchange of the light source and wavelength. It is supplied with a default 627 nm light source.

AUT.LED.LDC470.S

LED cover, with lens, fitted with a 470 nm LED (Blue) light source. Designed to fit the Autolab LED Driver kit. This cover allows electrochemical measurements under constant or modulated light.

AUT.LED.LDC505.S

LED cover, with lens, fitted with a 505 nm LED (Cyan) light source. Designed to fit the Autolab LED Driver kit. This cover allows electrochemical measurements under constant or modulated light.

AUT.LED.LDC530.S

LED cover, with lens, fitted with a 530 nm LED (Green) light source. Designed to fit the Autolab LED Driver kit. This cover allows electrochemical measurements under constant or modulated light.

AUT.LED.LDC590.S

LED cover, with lens, fitted with a 590 nm LED (Amber) light source. Designed to fit the Autolab LED Driver kit. This cover allows electrochemical measurements under constant or modulated light.

AUT.LED.LDC617.S

LED cover, with lens, fitted with a 617 nm LED (Red-orange) light source. Designed to fit the Autolab LED Driver kit. This cover allows electrochemical measurements under constant or modulated light.

AUT.LED.LDC627.S

LED cover, with lens, fitted with a 627 nm LED (Red) light source. Designed to fit the Autolab LED Driver kit. This cover allows electrochemical measurements under constant or modulated light.

AUT.LED.LDC655.S

LED cover, with lens, fitted with a 655 nm LED (Deep red) light source. Designed to fit the Autolab LED Driver kit. This cover allows electrochemical measurements under constant or modulated light.

AUT.LED.LDCCW.S

LED cover, with lens, fitted with a cool white light source. Designed to fit the Autolab LED Driver kit. This cover allows electrochemical measurements under constant or modulated light.

AUT.LED.LDCNW.S

LED cover, with lens, fitted with a neutral white light source. Designed to fit the Autolab LED Driver kit. This cover allows electrochemical measurements under constant or modulated light.

AUT.LED.LDCRB.S

LED cover, with lens, fitted with a 447.5 nm LED (Royal blue) light source. Designed to fit the Autolab LED Driver kit. This cover allows electrochemical measurements under constant or modulated light.

AUT.LED.LDCWW.S

LED cover, with lens, fitted with a warm white light source. Designed to fit the Autolab LED Driver kit. This cover allows electrochemical measurements under constant or modulated light.