Tìm kiếm phụ kiện

6.01503.120

Intelligent 2 mL cylinder unit for an OMNIS Titrator, Titration Module or Dosing Module. Without dosing tubing and antidiffusion tip.

6.01503.150

Intelligent 5 mL cylinder unit for an OMNIS Titrator, Titration Module or Dosing Module. Without dosing tubing and antidiffusion tip.

6.01503.210

Intelligent 10 mL cylinder unit for an OMNIS Titrator, Titration Module or Dosing Module. Without dosing tubing and antidiffusion tip.

6.01503.220

Intelligent 20 mL cylinder unit for an OMNIS Titrator, Titration Module or Dosing Module. Without dosing tubing and antidiffusion tip.

6.01503.250

Intelligent 50 mL cylinder unit for an OMNIS Titrator, Titration Module or Dosing Module. Without dosing tubing and antidiffusion tip.

6.01508.210

Intelligent cylinder unit 10 mL for one OMNIS Titrator, Titration Module or Dosing Module. This cylinder unit is especially recommended for the following solutions:• Aqueous alkali solutions• Titrant 5• Silver nitrate solutions• Nonaqueous alkali solutions• Permanganate solutions• EDTA solutionsWithout dosing tubing and antidiffusion tip.

6.01508.220

Intelligent cylinder unit 20 mL for one OMNIS Titrator, Titration Module or Dosing Module. This cylinder unit is especially recommended for the following solutions:Aqueous alkaline solutions; Titrant 5; Silver nitrate solutions; Nonaqueous alkaline solutions; Permanganate solutions; EDTA solutions; Without dosing tubing and antidiffusion tip.

6.01543.000

For aspirating off reagent in connection with the OMNIS Solvent Module.

6.01543.100

Aspiration tip for automated OMNIS titrations.

6.01543.110

Replacement hose for 601543100 aspiration tip.

6.01543.120

Titration tip with antidiffusion valve, suitable for OMNIS Karl Fischer titrator.

6.01562.000

Plastic pipette for volumes of 0.5 mL, 1 mL, 2 mL, 3 mL, 4 mL, 5 mL

6.01562.010

Mini-micropipette with 100 µL fixed volume.

6.01600.010

Adapter for connecting reagent bottles with 3S technology to an OMNIS Titrator, Titration Module or Dosing Module.

6.01600.200

Prevents continued running of liquid out of the reagent bottle into the titration cell.

6.01601.000

Reusable bottle cap with 3S technology for connecting reagent bottles to an OMNIS Titrator, Titration Module or Dosing Module.

6.01602.000

Aspiration coupling as spare part to a 6.01600.010 OMNIS Liquid Adapter

6.01620.000

Plastic bottle, wide-neck, with screw cap.

6.01620.010

Plastic bottle, wide-neck, graduated, with labeling area and screw cap.

6.01801.020

The pump tubing comes pre-equipped with adapters that permit direct installation in the peristaltic pump of the pump module. The Pharm-A-line pump tubing is used for the transport of both aqueous and nonaqueous solutions and must be operated in connection with the white press clamp in the pump module.

6.01803.000

Silicone tubing for connecting to the drainage of the Pick&Place module or pump module in order to channel any solution overflows that may occur safely into the waste canister.

6.01804.210

For tubing connections to the OMNIS Solvent Module or the Solvent Pump.

6.01804.460

The drain channel is mounted behind the workstations of the OMNIS Sample Robot WSM M/L and, in case of an error, collects any overflowing solution in order to channel it safely and contact-free through tubing into a waste canister.

6.01804.500

Tubing adapter for drainage tubing on Pick&Place modules and pump modules in the OMNIS Sample Robot Pick&Place.

6.01805.000

With light protection and protection against kinks.

6.01805.010

With light protection and protection against kinks.

6.01805.100

Tubing for the connection between peristaltic pump 1 or 3 in the pump module with the distributor (rinsing) on the Pick&Place module.

6.01805.110

Tubing for the connection between peristaltic pump 2 or 4 in the pump module with the distributor (aspiration) on the Pick&Place module.

6.01805.120

Tubing for the connection between the canister and the peristaltic pump in the pump module.

6.01805.130

Aspiration tubing with screw nipple to connect the reagent bottle to the Siphon Beaker.

6.01805.470

An FEP tubing that connects the Continuous Anion Trap outlet with the waste collector of the ion chromatograph.

6.01806.000

For use in the high-pressure flow path, e.g. as preheating capillary for Metrosep Carb 2 columns in the 2 mm version (6.01090.2x0).

6.01807.000

Adsorption cartridge for OMNIS Solvent Module or Solvent Pump, for filling with 6.2811.000 molecular sieve.

6.01807.010

Adsorber cartridge suitable for the OMNIS Oven Module

6.01808.010

Connector for drain tubing

6.01816.010

Drainage tubing

6.01829.010

Replacement tubing for the 6.1446.200 heating tubing stopper or for the 6.1446.220 Reagent Replacement Solvent Module stopper

6.01831.010

A PEEK capillary that connects the high-pressure pump of the ion chromatograph with the Eluent Producer Cartridge (EPC) of the 948 Continuous IC Module, CEP.

6.01831.020

A PEEK capillary that connects the Eluent Producer Cartridge (EPC) with the Continuous Trap (CT) of the 948 Continuous IC Module, CEP.

6.01831.030

A PEEK capillary that connects the Continuous Trap (CT) with the High-Pressure Degasser (H-DEG) of the 948 Continuous IC Module, CEP.

6.01831.040

A PEEK capillary that connects the High-Pressure Degasser (H-DEG) of the 948 Continuous IC Module, CEP with the injector of the ion chromatograph.

6.01831.050

A PEEK capillary that connects the High-Pressure Degasser (H-DEG) of the 948 Continuous IC Module, CEP with the waste collector of the ion chromatograph.

6.01900.010

Stirring propeller 30 mm ETFE with adjustable height for use with Rod Stirrer "Titrator" or Rod Stirrer "Sample Robot"

6.01900.020

Stirring propeller 13 mm ETFE with adjustable height for use with Rod Stirrer "Titrator" or Rod Stirrer "Sample Robot"

6.01900.030

Stirring propeller, 20 mm, with adjustable height for use with Rod Stirrer "Titrator" or Rod Stirrer "Sample Robot"

6.02001.010

Rack base for extending the main modules to the OMNIS Sample Robot

6.02001.200

For using the 6.1415.XXX / 6.1418.XXX titration vessels with 6.1414.XXX titration vessel lid on Eco Titrator / Eco Dosimat.

6.02003.010

Module base for extending the main modules M and L to the OMNIS Sample Robot.

6.02004.010

Bottle holder for OMNIS Titrator, Titration Module and Dosing Module.

6.02004.030

Bottle holder for 2.1009.0010 OMNIS Solvent Module.

6.02005.000

Electrode holder for one OMNIS titration system.

6.02005.010

Electrode Parking Station for electrode storage on an OMNIS titration system.

6.02007.000

Fixing panel for assembling lid trays on dummy panels in the OMNIS Sample Robot System Pick&Place.

6.02007.010

Lid tray for assembly on OMNIS pump module or 6.02007.000 dummy panel attachment in the OMNIS Sample Robot S system.

6.02007.020

Lid trays for assembly on OMNIS pump modules or 6.02007.000 blind plate attachments in the OMNIS Sample Robot M or L system.

6.02008.010

For fastening the Polytron in place, suitable for 601405040.

6.02008.030

Holder for homogenizer for fastening the Polytron in place, suitable for 601405060 titration vessel lid

6.02041.010

OMNIS sample rack for OMNIS Sample Robot Pick&Place, suitable for 9 sample beakers. The following sample beakers can be used: 6.01400.000, 6.01400.003, 6.01400.100.Plastic: Polypropylene (PP)

6.02041.020

OMNIS sample rack for OMNIS Sample Robot Pick&Place, suitable for 9 sample beakers. The following sample beakers can be used: 6.1459.310.Plastic: Polypropylene (PP)

6.02041.030

OMNIS sample rack for OMNIS Sample Robot Pick&Place, suitable for 16 sample beakers. The following sample beakers can be used: 6.01400.200, 6.01400.300, 6.01400.303.Plastic: Polypropylene (PP)

6.02041.040

OMNIS sample rack for OMNIS Sample Robot Pick&Place, suitable for 25 sample beakers. The following sample beakers can be used: 6.01402.000, 6.01402.003, 6.1459.400.Plastic: Polypropylene (PP)

6.02041.050

OMNIS sample rack for OMNIS Sample Robot Pick&Place, suitable for 9 sample beakers. The following sample beakers can be used: 150 mL beaker (tall shape and without spout).Plastic: Polypropylene (PP)

6.02041.060

OMNIS sample rack for OMNIS Sample Robot Oven, suitable for 50 sample vials (6.2419.000)

6.02041.070

OMNIS sample rack for OMNIS Sample Robot Oven, suitable for 50 sample vials (6.2420.007)

6.02041.080

OMNIS sample rack for OMNIS Sample Robot – NIR suitable for 77 disposable vials with an optical path length of 8 mm for measurements in transmission (6.7402.240).

6.02041.090

OMNIS sample rack for OMNIS Sample Robot – NIR, suitable for 77 disposable vials with a diameter of 15 mm for measurements in reflection (6.7402.110).

6.02041.100

OMNIS sample rack for OMNIS Sample Robot – NIR, suitable for 50 disposable vials with a diameter of 19 mm for measurements in reflection (6.7402.120).

6.02041.110

OMNIS sample rack for OMNIS Sample Robot – NIR, suitable for 50 disposable vials with a diameter of 22 mm for measurements in reflection (6.7402.130).

6.02041.120

OMNIS sample rack for OMNIS Sample Robot – NIR, suitable for 27 disposable vials with a diameter of 28 mm for measurements in reflection (6.7402.140).

6.02041.130

OMNIS sample rack for OMNIS Sample Robot NIR, suitable for 50 x 6 mL sample glasses (62419000) with septum (61448057).

6.02041.140

OMNIS sample rack for OMNIS Sample Robot Oven, suitable for 77 2R sample vials.

6.02042.000

The holder for rack labels permits durable labeling of the rack with an unambiguous name.

6.02047.000

Titration cell holder for fastening a coulometric titration cell to an OMNIS Coulometer or OMNIS Coulometer Module

6.02057.030

Holder for mounting the 6.02729.110 ultrafiltration cell 2 on the 858 Professional Sample Processor / 919 IC Autosampler plus.

6.02057.120

Holder for the 6.02729.110 ultrafiltration cell 2

6.02064.020

Retainer for fixing the 200 mL sample beaker in place in the gripper fingers of the OMNIS Sample Robot Pick&Place.

6.02100.010

Digital measurement channel for one OMNIS Titrator or Titration Module for the connection of digital "dTrodes" electrodes.

6.02101.011

Analog measurement channel for one OMNIS Titrator or Titration Module for the connection of analog electrodes. Compatible with OMNIS software version 2.18 or higher.

6.02101.020

Measurement channel for one OMNIS Titrator or Titration Module for the connection of conductivity measuring cells.

6.02102.010

Connecting cable for OMNIS instruments with MDL connector (0.5 m)

6.02102.020

Connecting cable for OMNIS instruments with MDL connector (1 m)

6.02102.030

Connecting cable for OMNIS instruments with MDL connector (2 m)

6.02102.040

Connecting cable for OMNIS instruments with MDL connector (5 m)

6.02102.050

Connecting cable for OMNIS instruments with MDL connector (10 m)

6.02104.000

Cable for connecting an analog electrode (plug-in head G) to an analog measuring module from OMNIS.

6.02104.010

Cable for connecting an analog electrode (plug-in head G) to an analog measuring module from OMNIS.

6.02104.020

Cable for connecting a temperature sensor (head G) to an analog measuring module from OMNIS.

6.02104.030

Cable for connecting a temperature sensor (head G) to an analog measuring module from OMNIS.

6.02104.040

Cable for connecting an analog polarizable electrode (plug-in head G) to an analog measuring module from OMNIS.

6.02104.050

Cable for connecting an analog polarizable electrode (plug-in head G) to an analog measuring module from OMNIS.

6.02104.300

Cable for connecting a dTrode (plug-in head Q) to the digital measuring module from OMNIS.

6.02104.310

Cable for connecting a dTrode (plug-in head Q) to the digital measuring module from OMNIS.

6.02104.600

Cable for connecting an electrode with plug-in head U to an analog measuring module from OMNIS.

6.02104.610

Cable for connecting an electrode with plug-in head U to an analog measuring module from OMNIS.

6.02105.000

Electrode cables (1x banana plug 4 mm, 1x banana plug 2 mm) to connect a disconnected reference electrode to an analog measuring input in an OMNIS titration system.

6.02105.010

Electrode cables (1x banana plug 4 mm, 1x banana plug 2 mm) to connect a disconnected reference electrode to an analog measuring input in an OMNIS titration system, length 1.5 m.

6.02106.000

Extension cable (0.55 m in length) for connecting an OMNIS Liquid Adapter to an OMNIS Titrator, Titration Module or Dosing Module.

6.02106.010

Extension cable (2 m in length) for connecting an OMNIS Liquid Adapter to an OMNIS Titrator, Titration Module or Dosing Module.

6.02107.000

Network cable (1 m) for connecting one OMNIS Sample Robot or OMNIS Titrator to an Ethernet Router, Ethernet Switch or local network

6.02107.010

Network cable (2 m) for connecting one OMNIS Sample Robot or OMNIS Titrator to an Ethernet Router, Ethernet Switch or local network

6.02108.000

6.021.08010

For connecting USB instruments.

6.02109.000

This adapter cable comprising socket F to plug P is suitable for use as a fixed cable (e.g. Optrode or Solvotrode easyClean) connecting a sensor without temperature sensor to the OMNIS analog measuring module.

6.02109.010

Adapter cable socket F on plug P for the 6.0340.000 polarizable KF electrode, connectable to the analog measuring module from OMNIS.

6.02110.000

Cable for connecting a Solvent Pump with an Eco KF Titrator, used for energy supply

6.02117.000

USB charging device for 946 Portable VA Analyzer.Power supply unit for the power supply of the 6.1115.100 Optrode if there is no USB connector available for this purpose on a Metrohm device (e.g. with older devices).

6.02135.000

6.02135.010

6.02201.001

Stylus for instruments with touch user interface

6.02600.010

Dummy panel for covering open spaces on the module plate of the OMNIS Sample Robot Oven

6.02600.020

Dummy panel for covering the front OMNIS Workstation Module position on a Sample Robot WSM M or L. This dummy panel is required in order to lock the Sample Robot WSM M or L when there is only 1 OMNIS Workstation Module installed at the rear position.

6.02600.030

Dummy panel for covering rear front OMNIS Workstation Module position on a Sample Robot WSM M or L. This dummy panel is required in order to lock the Sample Robot WSM M or L when there is only 1 OMNIS Workstation Module installed at the rear position.

6.02601.010

Gripper fingers for OMNIS Sample Robot Pick&Place for gripping sample beakers with an outer diameter of 43 to 65 mm.

6.02601.020

Gripper fingers for OMNIS Sample Robot Pick&Place for gripping sample beakers with an outer diameter of 50 to 72 mm.

6.02601.030

Gripper fingers for OMNIS Pick&Place Sample Robot for gripping sample beakers with an outer diameter of 48 - 64 mm.

6.02601.040

Gripper fingers for OMNIS Sample Robot Pick&Place for gripping sample beakers with an outer diameter of 28 - 48 mm.

6.02601.050

Gripper fingers for OMNIS Sample Robot Oven for gripping sample vials

6.02621.000

6.02621.030

This tool simplifies the attachment and disassembly of Luer lock connectors. It can be fitted on the Luer lock connector, where its shape facilitates the attachment of the tubing equipped with Luer connectors.

6.02700.000

Safety shield for Pick&Place modules

6.02700.010

Safety shield for the gripper of an OMNIS Sample Robot Oven

6.02700.020

The connector plate connects 2 OMNIS Workstation Modules on a Sample Robot WSM M or L, thus lending it additional stability.

6.02701.000

Adsorption cartridge for a 6.01601.000 OMNIS Bottle Cap.

6.02701.010

PTFE sealing ring for bottle cap, multi-use.

6.02703.000

The press clamp is used to fix and secure the pump tubing in the "Peristaltic" pump module.

6.02704.000

For fixing in place the PVC or PTFE tubing that leads to the workstation.

6.02705.000

For organizing tubing and cables between Pick&Place module and titrator

6.02706.000

The cable cover protects the MDL and Ethernet cables connectors on the OMNIS Sample Robot.

6.02707.000

Protective case for the Mira M-3 and all accessories.

6.02707.010

Case for 946 Portable VA Analyzer and accessories.

6.02707.020

Robust carrying case for MIRA DS and all accessories.

6.02707.030

Rugged carrying case for Misa and all accessories.

6.02707.400

Protective case for the Mira P and all accessory parts.

6.02708.000

6.02708.010

6.02708.020

6.02708.030

602709000

Rugged carrying case for TacticID-1064 ST

6.02709.010

Plastic stoppers, suitable for 2.1001.4220 OMNIS Karl Fischer Titrator.

6.02709.020

Plastic septum stopper, suitable for 6014050X0 titration vessel lids.

6.02709.030

Plastic screw nipple, suitable for 6014050X0 titration vessel lids.

6.02709.040

Stopper for titration vessel lids 6014050X0.

6.02709.050

For fixation of the Polytron in the 601405040 titration vessel upper part.

6.02710.000

Lid with seals for volumetric Karl Fischer Titration in 6.01402.000 and 6.01402.003 sample beakers in the OMNIS Sample Robot Pick&Place system.

6.02710.010

Lid with seals for volumetric Karl Fischer Titration in 6.01400.200, 6.01400.300 and 6.01400.303 sample beakers in the OMNIS Sample Robot Pick&Place system.

6.02710.030

Dis-Cover lid for 75 mL 6.01402.000 and 6.01402.003 sample beakers in the OMNIS Sample Robot Pick&Place system.

6.02710.040

Dis-Cover lid for 120 mL 6.01400.200, 6.01400.300 and 6.01400.303 sample beakers in the OMNIS Sample Robot Pick&Place system.

6.02710.050

Dis-Cover lid for 250 mL 6.01400.000, 6.01400.003 and 6.01400.100 sample beakers in the OMNIS Sample Robot Pick&Place system.

6.02711.000

Suitable for use in Karl Fischer water content determinations of pasty substances such as honey, cosmetics, greases or various dairy products.The spoon for paste facilitates the addition of viscous samples. It is handled like any other spatula and enables convenient, rapid, and loss-free addition of pastes into the Karl Fischer titration vessel.We furthermore recommend the use of a homogenizer for dissolving viscous samples quickly and completely.Compatible with 6014050X0 titration vessel lids.

6.02711.010

Grounding plug for the use of low-conductivity eluents in amperometric detection.

6.02712.000

Protective cover for Eco Dosimat / Eco Titrator display.

6.02729.110

For the Inline ultrafiltration of samples together with the 858 Professional Sample Processor / 919 IC Autosampler plus. As an alternative to the time-consuming manual filtration with a syringe filter.

6.02743.030

The 50 mL bottles are mad of polypropylene (PP) plastic and can be used for samples, standards, check standards and rinsing solutions. Production and packaging both take place under sterile and clean room conditions. This guarantees minimum contamination. The sample vessels are subjected to random checks for leachable anions and cations.

6.02743.090

The screw cap with septum is perfectly suitable for maintaining samples and standards over an extended time period. Screw cap with septum for bottle, PP, 50 mL (6.02743.030); PE bottle, 125 ml (6.1627.000) and PE bottle, 50 ml (6.1608.100).In the case of the 858 Professional Sample Processor, the coated sample needle made of steel (6.2624.200) or the Pick-up needle (6.2624.100) must be mounted in order to penetrate the septum.

6.02743.100

The screw cap without septum can be used in combination with the bottle PP, 50 mL (6.02743.030). The stopper with perforation (6.2743.070) can be slid into the hole and seals the bottle. This provides a perfect sealing option if the standard needle (6.2846.010) is used on the 858 Professional Sample Processor.

6.02744.050

Adapter for syringe for pre-rinsing the aspiration filter (6.2821.090). The adapter can be screwed onto the aspiration filter. A syringe can be used to rinse the aspiration filter with ultrapure water or eluent.

6.02764.010

Replacement seals for the flow-through cell, 10 mm (62839131), for UV/VIS instruments

6.02801.000

Wad of cotton (4 pieces), suitable for OMNIS 601406010 adsorber tube.

6.02813.000

Dummy cell for instrument testing.

6.02821.000

Holder for the Hamilton PRP-X 100 Guard cartridge for connection to the analytical separation column.

6.02821.010

Holder for the MetroSil RP 3 Guard/4.0 cartridge for connection to the analytical separation column.

6.02850.000

The high-pressure degasser is responsible for the elimination of the hydrogen gas that is formed during eluent production.

6.02850.100

The continuous anion trap (CT-A) removes anionic contamination and carbonate from the eluent.

6.02850.200

The eluent producer cartridge A (EPC A) produces the high-purity hydroxide eluent from the 4 mol/L hydroxide concentrate, based on water electrolysis. The cation exchanger diaphragm enables the selective migration of cations into the eluent. The EPC A is fed ultrapure water, which can be operated fully automatically in connection with a water processing system.

6.03001.120

Intelligent 2 mL cylinder unit for an OMNIS Titrator, Titration Module or Dosing Module. Includes dosing tubing and antidiffusion tip.

6.03001.150

Intelligent 5 mL cylinder unit for an OMNIS Titrator, Titration Module or Dosing Module. Includes dosing tubing and antidiffusion tip.

6.03001.210

Intelligent 10 mL cylinder unit for an OMNIS Titrator, Titration Module or Dosing Module. Includes dosing tubing and antidiffusion tip.

6.03001.220

Intelligent 20 mL cylinder unit for an OMNIS Titrator, Titration Module or Dosing Module. Includes dosing tubing and antidiffusion tip.

6.03001.250

Intelligent 50 mL cylinder unit for an OMNIS Titrator, Titration Module or Dosing Module. Includes dosing tubing and antidiffusion tip.

6.03002.150

Cylinder unit 5 mL for Eco Dosimat / Eco Titrator. Without dosing tubing and antidiffusion tip.

6.03002.210

Cylinder unit 10 mL for Eco Dosimat / Eco Titrator. Without dosing tubing and antidiffusion tip.

6.03002.220

Cylinder unit 20 mL for Eco Dosimat / Eco Titrator. Without dosing tubing and antidiffusion tip.

6.03002.250

Cylinder unit 50 mL for Eco Dosimat / Eco Titrator. Without dosing tubing and antidiffusion tip.

6.03004.210

Intelligent 10 mL cylinder unit for one OMNIS Titrator, Titration Module or Dosing Module. This cylinder unit is especially recommended for the following solutions:Aqueous alkaline solutions; Titrant 5; Silver nitrate solutions; Nonaqueous alkaline solutions; Permanganate solutions; EDTA solutions; Includes dosing tubing and antidiffusion tip.

6.03004.220

Intelligent 20 mL cylinder unit for one OMNIS Titrator, Titration Module or Dosing Module. This cylinder unit is especially recommended for the following solutions:Aqueous alkaline solutions; Titrant 5; Silver nitrate solutions; Nonaqueous alkaline solutions; Permanganate solutions; EDTA solutions; Includes dosing tubing and antidiffusion tip.

6.05000.300

Accessory kit for installation of the 948 Continuous IC Module, CEP

6.05001.010

The accessory set contains all of the components required for the tube connections between a rinsing pump and an aspiration pump at the "Peristaltic" pump module. In addition to preassembled tubing with Luer connectors, each of these also includes two press clamps and pump tubing.

6.05001.110

This accessory kit contains all of the components required for the tubing setup for 1 rinsing pump and 1 aspiration pump on the pump module of the OMNIS Workstation Module (1T/2P). In addition to preassembled tubing with Luer connectors, each of these also includes 2 press clamps and pump tubing. A tool for simplifying attachment of the Luer connectors is also included in the set.

6.05001.210

This accessory kit contains all of the components required for the tubing setup for 2 rinsing and 2 aspiration pumps on the pump module of the OMNIS Workstation Module (2T/4P). In addition to preassembled tubing with Luer connectors, each of these also includes 4 press clamps and pump tubing. A tool for simplifying attachment of the Luer connectors is also included in the set.

6.05002.010

Complete accessory set for converting the OMNIS Sample Robot Pick&Place into a version with pipetting options. The set can be mounted on all versions of the OMNIS Sample Robot (S,M and L).

6.05300.000

Accessory set for assembling the Dose-in Gradient for cation analyses.

6.05330.010

Accessory set for Inline Ultrafiltration 2 - pull mode. For use with the 858 Professional Sample Processor/ 919 IC Autosampler plus.

6.05330.110

Accessory set for Inline Ultrafiltration 2 - push mode. For use with the 858 Professional Sample Processor/ 919 IC Autosampler plus.Recommended set for the combination with Inline Dilution (MIDT).

6.05330.210

Accessory set to combine Inline Ultrafiltration 2 and MiPT. For use with the 858 Professional Sample Processor.

6.05330.220

The IC equipment contains all of the accessory parts necessary for using the peristaltic pump to transfer samples from the 889 IC Sample Center Basic to the ion chromatograph.

6.05330.230

Accessory set for assembling a Dosino for Partial-Loop-Injection in combination with the 889 Basic (28890030 & 28890040)

6.05330.400

IC equipment for the connection and bidirectional control of Metrohm IC and Agilent ICP-MS (IC-ICP/MS)

6.05406.000

Complete accessory set for coulometric Karl Fischer titration.

6.05406.010

Complete accessory set for coulometric Karl Fischer titration.

6.05406.050

Complete accessory set for volumetric Karl Fischer titrations on an OMNIS Oven Module

6.05406.060

Complete accessory set for coulometric Karl Fischer titrations with a generator electrode with diaphragm on an OMNIS Oven Module

6.05406.070

Complete accessory set for coulometric Karl Fischer titrations with a generator electrode without diaphragm on an OMNIS Oven Module

6.05609.000

Complete accessory set for volumetric Karl Fischer titration.

6.05609.010

Complete accessory set for volumetric Karl Fischer titration with Polytron.

6.05610.050

Complete accessory set for volumetric Karl Fischer titration

6.05610.060

Complete accessory set for volumetric Karl Fischer titration with Polytron

6.05700.000

Four slide sleeves and rubber gripper fingers each for replacement on the gripper finger of the OMNIS Sample Robot.

6.05700.010

Two pump tubings each and associated press clamps for replacement in the OMNIS pump module. One Consumable Kit can be used for re-equipping two peristaltic pumps of the pump module.

6.05700.140

FEP tubing connections M6 (40 cm) and antidiffusion tip for 6.03001.xxx and 6.03004.xxx OMNIS cylinder units.

6.05700.160

Replacement seals for 6.02710.000 lid, 25 pieces.