OMNIS IC equip.: MIDT

Flangeless fitting for 1/8'' tubing.Quantity: 2 pcs

CO2 Absorber (Tube) with a Luer adapter; protects reagents and eluents from particles and ensures consistent retention times for CO2-sensitive eluents.

Spiral band for holding together different tubings or cables.

OMNIS IC accessory set to install the reagent bottle onto the Reagent Organizer / Reagent Organizer Liquid Control.

The OMNIS Dosing Drive Unit functions as a dosing drive for attachable cylinder units used for the precise aspiration and dosing of liquid volumes.The OMNIS Dosing Drive Unit is compatible with various cylinder units (2 to 50 mL). Thanks to the new design, a higher resolution and accuracy can be achieved during dosing.Specifications:Resolution: 250,000 steps per cylinder volume; Dosing times/filling times: 10 seconds;

The OMNIS MISP Unit acts as a holder and pullout for the accessories of the various Metrohm inline sample preparation techniques (Metrohm Inline Sample Preparation "MISP") and liquid handling processes. The innovative pull-out design makes it easy to insert or change accessories. As a result, they are stored in an orderly and space-saving way and integrated in the flow path.With the corresponding accessories, the following Metrohm inline sample preparation techniques can be carried out with the OMNIS MISP Unit:Metrohm Inline Ultrafiltration (UF); Metrohm Inline Dilution (MIDT); Metrohm inline dilution in combination with Metrohm inline ultrafiltration (MIDT-UF); Metrohm Inline Dialysis; Metrohm intelligent Partial Loop injection Technique (MiPT); Metrohm inline ultrafiltration and Metrohm intelligent Partial Loop injection Technique in combination (UF-MiPT); Metrohm intelligent Preconcentration Technique (MiPCT); Metrohm intelligent Preconcentration Technique with matrix elimination (MiPCT-ME); Metrohm intelligent Pick-up injection Technique (MiPuT); Metrohm Inline Neutralization and Metrohm Inline Cation Removal; Metrohm intelligent Preconcentration Technique with inline neutralization (MiPCT-NE); Ultrafiltration or dialysis cell, transfer tubings or transfer capillaries can be used in the OMNIS MISP Unit. All trap columns available from Metrohm can be mounted with the optional MISP holder. Various connectors can be fastened to the optional MISP base plate and integrated into the flow path.

The dilution station is used for automatic dilution of samples. A defined amount of the concentrated sample is precisely measured by an OMNIS Dosing Drive Unit. The concentrated sample is conveyed to the dilution vessel with the required volume of the dilution solution. The built-in magnetic stirrer mixes the concentrated sample and the dilution solution evenly. The diluted sample is then transferred through the sample outlet into the sample path.Metrohm recommends using the following stirring bar:Stirring bar / 8 x 3 mm (6.1903.000); The dilution station is equipped with an overflow. The liquid in the overflow is collected in the drip collector, runs from there to the leak sensor, and is then fed into the drainage tubing system.A maximum of 1 dilution station can be installed per sample changer. If contaminated, the dilution vessel can be cleaned or replaced.Note: This upgrade must be installed by an authorized Metrohm service engineer.

The switching valve 3/2 is a valve with 3 connectors and 2 switching positions. The switching valve 3/2 is available with either a valve attachment with UNF 10/32 connectors or one with M6 connectors.It can be used for the following applications, for example:Anion/cation system: Control as to the channel into which the sample is injected.; Rinsing with 2 different solutions: Control as to which rinsing solution is used.; A maximum of 3 switching valves 3/2 can be installed per sample changer.Note: This upgrade must be installed by an authorized Metrohm service engineer.