OMNIS Peristaltic Pump Unit 2-Channel

2.1056.1020

The OMNIS Peristaltic Pump Unit is used as the peristaltic pump in the OMNIS IC System to convey the samples and auxiliary solutions.

It works according to the displacement principle, i.e., liquids are forced through the pump tubing by external mechanical deformation of the pump tubing. The pump tubing is deformed by pressing it against a rotating roller head.

The two channels can be operated independently of each other at different speeds, increasing flexibility for a wide range of applications.

Specifications:

Number of channels: 2
Rotational speed increment: 2.5 rpm
Minimum rotational speed: 2.5 rpm
Maximum rotational speed: 250 rpm
Rotation direction: Clockwise

Daha yakından tanıyın OMNIS Peristaltic Pump Unit 2-Channel

Manual OMNIS IC

Ekipmanlar Size özel OMNIS Peristaltic Pump Unit 2-Channel download

Aksesuarlar PDF dosyasını indir

Pump tubing, ID 0.5 mm, orange - yellow

6.01826.010

Pump tubing with an inner diameter of 0.5 mm for use with the Peristaltic Pump Unit in the OMNIS IC system. The tubing enables controlled and reliable transport of liquids for examples for dialysis, suppressor regeneration, or PCR solutions. It is designed for consistent flow performance during operation. Its material properties support stable functioning under routine analytical conditions.

Pump tubing, ID 1.0 mm, white - white

6.01826.020

Pump tubing with an inner diameter of 1.0 mm for use with the Peristaltic Pump Unit in the OMNIS IC system. The tubing enables controlled and reliable transport of liquids for examples for sample solutions. It is designed for consistent flow performance during operation. Its material properties support stable functioning under routine analytical conditions.

OMNIS IC equip.: D-INJ, PP

6.05331.020

Accessory set for Full Loop Injection in OMNIS IC: With this technique, the sample loop can be filled using an OMNIS Peristaltic Pump Unit.Prerequisites:OMNIS IC S/M/L with OMNIS IC AS/ASCOOL, including:available OMNIS Peristaltic Pump Unit;

OMNIS IC equip.: UF, PP/DD

6.05331.030

Accessory set for Ultrafiltration in OMNIS IC: Inline ultrafiltration allows the sample to be separated from contained particles. The main component of the Metrohm Inline Ultrafiltration system is the ultrafiltration cell. The ultrafiltration cell is suitable for sample filtration with high demands on filtration efficiency and sample throughput. This equipment is for the setup with a combination of the Peristaltic Pump Unit and the Dosing Drive Unit.Prerequisites:OMNIS IC S/M/L with OMNIS IC AS/ASCOOL, including:available OMNIS Dosing Drive Unit; available OMNIS Peristaltic Pump Unit channel; available OMNIS MISP Unit; AS/ASCOOL equipped with a switching valve 3/2, UNF;

Daha fazlası