Màu nhuộm, chất tạo màu và mực

OMNIS Client/Server nâng cao hiệu suất kinh doanh nhờ khả năng quản lý máy chủ linh hoạt, giúp cắt giảm chi phí thông qua giảm phần cứng, tiêu thụ năng lượng và bảo trì tại nhiều địa điểm.

Determination of the nitrogen content of nitrocellulose by potentiometric titration with Fe(II) using a combined Pt electrode.

The hydroxyl number is an important sum parameter for quantifying the presence of hydroxyl groups in a chemical substance. As a key quality parameter, it is regularly determined in various polymers like resins, paints, polyesterols, fats, and solvents. Unlike other standards, EN 4629-2 works pyridine-free and without refluxing at elevated temperatures for a longer time. The determination is based on the catalytic acetylation of the hydroxyl group. It is performed at room temperature, requires only a small sample volumen, and can be fully automated. This Application Note describes the potentiometric determination of the hydroxyl number in 1-octanol and polyethylene glycol according to EN 4629-2. Using the OMNIS DIS-Cover technique, all sample preparation steps can be fully automated. Furthermore, the use of an OMNIS Sample Robot allows parallel analysis of multiple samples. The average time per analysis for one sample is thus reduced from approximately 49 min to 25 min., considerably increasing productivity in the laboratory.

Determination of Fe, Pb, Cd, and Cu in Co(Ac)2 solution using the MME.

Dye samples are analyzed for trace chromate. Chromate (Cr(VI)) is considered toxic and potentially carcinogenic for which reason its concentrations should be as low as possible. This sample is prepared with C18 cartridges and injected applying Metrohm intelligent Preconcentration Technique (MiPCT). After each injection, the preconcentration column requires additional rinsing to eliminate matrix effects. For this purpose, no other instrument than an 800 Dosino is required. The system is optimized for sample volumes between 20 and 2000 µL. For most samples additional rinsing of the preconcentration column is not required.